Carbon tool steel from the Din system
Are you interested in carbon tool steels in the DIN system from the supplier AvecGlob? Here you will find interesting information on this topic.
General provisions and scope of application
The main standard that defines the technical conditions and characteristics of carbonaceous tool steels produced in Europe, and particularly in western Germany, is DIN 10020 and DIN 10027−1.
Definition
In these standards, instrumental carbon steels are considered as an «iron-carbon» alloy with a maximum carbon content of up to 2%.
Steel is subject to certain requirements, such as viscosity, weldability and formability. They are characterized by limited hardenability, and according to the requirements of the specified standards, all carbonaceous tool steels must have a fine-grained structure and limitations on the percentage content of phosphorus and sulfur-no more than 0.045% for each element.
Supplier — AvekGlob Company — offers at a reasonable price from the manufacturer a diverse range of carbon tool steels that meet the technical requirements of the standards DIN 10020 and DIN 10027−1. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Properties
Depending on the application, instrumental carbon steel must be chosen whose properties correspond to all the specified boundary conditions. This selection process can take a long time if, for example, diametrically opposite properties are required, including high hardness and at the same time high viscosity. In this case, you should consider which property will significantly affect the tool life.
The table below shows some of the most important properties of carbonaceous tool steels. The tensile strength parameters refer to the values of the samples in the quenched state.
| Property | unit of measurement | The numerical value |
| Ultimate tensile strength | MPa | 1500 — 4000 |
| Elastic modulus | GPa | 210 — 246 |
| Maximum hardness | According to Rockwell, the scale C | 40 — 72 |
| Maximum application temperature | ° C | Not more than 615 |
| Corrosion resistance | mm / year | 0.001 to 1 |
Supplier — AvekGlob Company — offers to purchase various grades of carbon tool steels that meet the technical standards and requirements of DIN 10020 and DIN 10027−1. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.