Supplier — AvekGlob Company — offers zirconium woven mesh at reasonable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Technical specifications

Zirconium woven mesh is supplied from zirconium of various degrees of chemical purity, but not less than 99%. At the same time, the absorbing ability of the metal to radioactive radiation is of decisive importance. The zirconia wire needed to make woven mesh is obtained using crystallization processes, solid state and other ultra-high purification processes such as sublimation.

Urgency of application

Woven wire mesh made of zirconium is used in nuclear reactor control systems. When used in control-recording systems, zirconia woven mesh passes additional control over the dimensions of the cells and resistance to conductive resistance; this applies to such applications as the determination of gas and the tolerances for thermometry of the occurring thermochemical reactions in the chemical industry.

Zirconium woven mesh is used in filtration units of various mechanical and biomedical systems, and also as electrodes. The mesh electrodes of zirconium are distinguished by their durability, density and high efficiency in the transmission of power.

Chemical composition of mesh material

Complies with the technical requirements of TU 95.166−83. More often used wire E635, which includes:

Zirconium — not less than 97.5%;

Niobium — up to 2.0%;

Nickel — up to 0,2%;

Iron — up to 0,1%;

Aluminum — up to 0.05%.

In zirconium wire E265 lead traces are allowed. Also, zirconium wire of industrial grade E110 and E125 with a reduced percentage of niobium can be used for grid production.

Physical and mechanical properties of mesh material

Density, kg / m ³ — 6506;

Melting point, ⁰ С-1852;

Specific heat capacity, cal / kgmol — 67.1;

Coefficient of thermal conductivity, W / megade — 22,7;

Coefficient of thermal expansion, μm / deg — 5.7;

Vickers hardness, НV — 903;

Modulus of elasticity, GPa — 88;

The limit of time resistance, MPa −390… −550.

Assortment

Zirconium woven mesh is usually produced by wire drawing of diameters of 0.9, 1.0, 1.5, 2.0, 3.0 mm.

Supplier — AvekGlob Company — offers to purchase zirconium woven mesh in any quantity and in a large range of cell sizes. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.