- Mainpage
- Directory
- Nickel alloys
- Precision Alloys
Tape, round, wire 80NKHS
Magnetically soft precision alloy 80NKHS has a very high magnetic permeability and low coercivity in weak fields at saturation induction, component 0,65−0,75 T With a gradual cooling after heat treatment from +600 °C, is characterized by small specification changes in climatic temperatures. range.
Chemical composition in percent 80NKHS
| P | Cr | Co | S | Si | Mn | Ni | C |
|---|---|---|---|---|---|---|---|
| to 0.015 | 0.3 — 0.6 | 26.5 — 28 | to 0.015 | to 0.25 | 0.2 — 0.4 | to 0.3 | to 0.04 |
The physical characteristics of the brand 80NKHS.
| a 10 6 | T | l | C | E 10 — 5 | R 10 9 | r |
|---|---|---|---|---|---|---|
| 10.7 | 100 | |||||
| 1/Deg | Grad | W/(m·deg) | J/(kg·deg) | MPa | Ohm·m | kg/m3 |
| 20 | 2.2 | 200 | 7980 |
Designations:
| Physical characteristics of this brand of alloy: | |
|---|---|
| — 1st kind of modulus of elasticity, [MPa] | — E |
| — The heat capacity of the material (or the ratio of teploprovodna.), in [W/(m·deg)] | -l |
| — The temperature required to obtain these properties, [Grad] | — T |
| — linear coefficient. temp. extensions to [1/Deg] (temp. the interval 20o), | -a |
| — electrical resistivity, [Ohm·m] | -R |
| — The density of this material, [kg/m3] | -r |
| — the specific heat capacity of the material in [j/(kg·deg)] (temp. the interval 20 ° C) | -C |
Magnetic characteristics:
| the coercive force (not more than) [A/m ] | Hc |
|---|---|
| the magnetic permeability (not above) [ MH/m ] | Umax |
| — specific losses (no higher) frequency 50 Hz, magnetic induction of 1.0 T [ W/kg ] | P1.0/50 |
| — T magnetic induction intensity of a magnetic field of not less than 100, in a magnetic field [ A/m ] | B100 |
Mechanical characteristics 80NKHS at temperatures of 20oC.
| Assortment | d5 | Eg. | sT | Size | KCU | blower SB | y | Heat treatment. |
|---|---|---|---|---|---|---|---|---|
| Tape according to GOST 10160−75 | 20 | 295 | 590 | |||||
| - | % | - | MPa | mm | kJ / m2 | MPa | % | - |
| Sugartown. tape according to GOST 10160−75 | 2 | 1080 |
Welding:
| weldability limited | — welding is possible in the process of heating up to temp. 100−120? C and further thermal treatment |
|---|---|
| konovalivka | in order to obtain quality welded joints, it is necessary to perform additional operations: during welding heating up to temp. 200−300°C, heat treatment (annealing) after welding. |
| Welded without any restrictions | — welding is carried out without further heat treatment and pre-heating. |
| Mechanical characteristics: | |
|---|---|
| — Short-term tensile strength in [MPa] | blower SB |
| — Yield strength (limit of proportionality) for the residual strain, [MPa] | sT |
| — at break elongation in [ % ] | d5 |
| — narrowing of the relative in [ % ] | y |
| — the viscosity of the shock, in [ kJ / m2] | KCU |
| — Brinell hardness [MPa] | HB |
Scope
Alloy 80NKHS used in the manufacture of small cores of transformers, relays and chokes, working in weak magnetic fields, screens; in the manufacture of a contactless relay of small thickness (0,05−0,02 mm) magnetic amplifiers and pulse transformer cores. To soft magnetic alloys are alloys whose composition includes cobalt, Nickel in addition to iron. Applied soft magnetic alloy 80NKHS, typically in electrical engineering, in the production of magnetic alternating magnetic field in the transformer industry, radio engineering, electrical engineering, systems automation, remote control, computer measurement technology. To the class of magnetically soft materials is a particularly pure ferromagnetic iron, electrical low carbon steel (non-alloy, silica), precision nizkotemperaturnye alloys with iron-Nickel, iron base, ferrimagnetic and ferromagnetic powder, composite. Such alloys are melted in a special metallurgical furnaces for production of necessary forms, exposing them to the bars later forging or rolling. Soft magnetic alloys are widely used in modern industry in the manufacture of transformer cores, microphones, components, memory for computers, magnetic cores which are designed for operation in sea water, parts for electric machines, magnetic antennas.
Buy at best price
The range of products from alloy 80NKHS, represented by LLC «AVEK global» can satisfy almost any consumer. This alloy belongs to the popular group of steel products due to its real value and variety of output options. Quality metal products is guaranteed absolute observance of all technological norms of production. In the absence of the base performance required of the product and if necessary other option products, we can produce custom sizes to order.