• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Wire, circle, Inconel 625® rod - 2.4856 - alloy 625

Wire, circle, Inconel 625® rod - 2.4856 - alloy 625

Do you want to buy a circle, wire, wire from Inconel 625? Alloy (Alloy 625, 2.4856) from the supplier — the company AvecGlob? Here you will get acquainted with the necessary information on this topic

AvekGlO sells a round bar, wire or wire made from the Inconel 625™ alloy (other designations — Alloy 625, 2.4856) at affordable prices from manufacturers. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

Inconel® 625 is an alloy of nickel with chromium, molybdenum and niobium. The alloy has excellent resistance to oxidation, as well as increased corrosion resistance and strength at high temperatures. To obtain high-strength properties of Inconel® 625, treatment with aging due to aging is not required due to the effect of a solid solution of molybdenum and niobium on nickel-

chrome matrix. Inconel® 625 is resistant to chloride ion corrosion cracking and pitting corrosion, which makes it suitable for use in seawater. Inconel® 625 can operate from cryogenic temperatures up to 370 ° C.

The presence of niobium provides an increase in toughness, which ensures the performance of products under extreme conditions.

Especially well the glory behaves in chloride environments (sea water), in particular, under conditions accompanied by elevated temperatures. Therefore, the Inconel 625™ alloy (Alloy 625, 2.4856) is used in the manufacture of exhaust systems, air duct systems, in engines and chemical processing equipment. In addition, the alloy is used in the aerospace industry, nuclear reactors and in devices that control environmental pollution.

The chemical composition of the Inconel 625™ alloy (Alloy 625, 2.4856) conforming to ASTM B446 and UNS N06625 standards is presented in the table:

Element Cr Ni Mo Nb Cb + Ta Al Ti C Fe Mn Si P S
Minimal percentage 20.0 - 8.0 - 3.15 - - - - - - - -
The maximum percentage 23.0 The basis 10.0 1.0 4.15 0.4 0.4 0.1 5.0 0.5 0.5 0.015 0.015

Company Avecglob proposes to purchase at a cost-effective prices from the manufacturer a circle, bar, wire from the alloy Inconel 625™ (Alloy 625, 2.4856). The supplier provides guaranteed delivery of products to any point set by the customer.


Basic physical properties of the alloy:

Density, kg / m 3 — 8440;

Melting point, 0 С — 1350;

The coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 12,8;

Modulus of elasticity, GPa — 205.8;

The coefficient of thermal conductivity in the temperature range 20… 100 0 С, W / mgrad — 5,7… 8,1.

Basic mechanical characteristics of the alloy:

The limit of time resistance. MPa — 830… 1100;

Yield strength, MPa — 140… 160;

Relative elongation at tension,% — 40;

Hardness according to Brinell, HB, not more — 232.

Buy at affordable prices from manufacturers of a circle, bar or wire, which are made of the alloy grade Inconel 625™ (Alloy 625, 2.4856) offers the company AvekGlob. The supplier carries out the immediate shipment of rolled metal to any point agreed by the customer.