• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Inconel® woven mesh

Inconel® woven mesh

Supplier — AvekGlob Company — offers a woven net of Inconel® alloys at an affordable price from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Technical specifications

Weaving mesh of Inconel® alloys are manufactured for use in conditions of moderate and severe corrosion at high temperatures. Inconel® alloys have excellent resistance to carburization, pitting and crevice corrosion,

stress corrosion cracking and oxidation. They are resistant to a wide range of corrosive media, such as organic, inorganic compounds, acids and alkalis. The materials have high-temperature mechanical strength, creep resistance and a long service life.

The grid is produced in the following classes:

Inconel 600 Mesh: alloy 600 has exceptional resistance to heat,

oxidizing and corrosive environment and provides a productivity of up to 1000 0 C. It is resistant to SCC, restores the environment and has good mechanical characteristics from cryogenic to high temperatures;

Inconel 601 Mesh: Inconel 601 has a high resistance to oxidation up to 1250 o C. It is read by high-temperature net material, which provides good resistance to peeling, creep strength and high temperature stability. The alloy maintains ductility even after prolonged use;

Inconel 617 Mesh: alloy 617 offers increased oxidation temperature and corrosion resistance up to 900 ° C. It provides high mechanical strength and excellent metallurgical stability. The alloy is resistant to corrosion of pitting, as well as to various strong acids, such as hydrochloric, hydrofluoric, sulfuric and nitric;

Inconel 625 Mesh: this is a high-strength structural material for excellent resistance to corrosion and oxidation at elevated temperatures up to 1093 ° C;

Inconel 718 Mesh: alloy 718 is a deposited material to provide high high-temperature corrosion-resistant properties and mechanical strength. It has an outstanding creep resistance up to 982 ° C.

Urgency of application

Woven mesh of Inconel® alloys are used in oil filters, air compressor filters, vacuum equipment filters, heating and cooling furnaces. Inconel-grid is also resistant to vibration, and therefore used in industrial screens and separators.

Chemical composition of mesh material

Make Percentage
Ni Cr Fe Mo Nb Co Mn Cu Al Ti Si C S P B
600 72.0 14.0−17.0 6.0−10.0       1.0 0.5     0.5 0.15 0.015    
617 44.2−56.0 20.0−24.0 3.0 8.0−10.0   10.0−15.0 0.5 0.5 0.8−1.5 0.6 0.5 0.15 0.015 0.015 0.006
625 58.0 20.0−23.0 5.0 8.0−10.0 3.15−4.15 1.0 0.5   0.4 0.4 0.5 0.1 0.015 0.015  
690 59.5 thirty 9.2       0.35 0.01 0.02   0.35 0.019 0.003    
718 50.0−55.0 17.0−21.0 balance 2.8−3.3 4.75−5.5 1.0 0.35 0.2−0.8 0.65−1.15 0.3 0.35 0.08 0.015 0.015 0.006
X-750 70.0 14.0−17.0 5.0−9.0   0.7−1.2 1.0 1.0 0.5 0.4−1.0 2.25−2.75 0.5        

Physical and mechanical properties of mesh material

Density, kg / m 3 — 8100… 8150;

The melting point, 0 C-1300… 1370;

Specific heat capacity, cal / kgmol — 440… 455;

Coefficient of thermal conductivity, W / md — 17… 19;

Coefficient of thermal expansion, μm / deg — 7… 8;

Hardness in Brinell, HB — 200… 209;

Modulus of elasticity, GPa — 88;

The limit of the temporary resistance, MPa −1350… −1450.

Assortment

The braided net of Inconel® alloys is usually made of wire with a diameter of 0.2 to 1.6 mm.

Supplier — AvekGlob Company — offers to purchase a woven net of Inconel® alloys in any quantity and in a wide range of cell sizes. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.