• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

PT-7M pipe, wire

PT-7M pipe, wire

Alloy grade PT are similar to titanium alloys, which are designed KM research Institute «Prometheus» for marine use. These alloys composition does not match the common alloys and aerospace applications.

Production and advantages of rod, wire grade PT-7M
Prefabricated Treatment Plasticity of δ% Strength (MPa) KCU j/cm3
Rod The degree of deformation of 40% 7% 840 ---
Wire Annealing 22% 500 80
The degree of deformation of 80% 4% 950 ---
The degree of deformation 60% 5% 900 ---

Annealing temperature for forgings, die forgings and rods of alloy PT-7M is in the range of 600° — 650 °C, and the heat resistance of the product depends on the cooling rate after heat treatment. Cooling of the alloy with an intermediate rate between the furnace cooling and water offers the greatest resistance.

The physical characteristics of PT-7m
The temperature at which the received data characteristics, °C 20°C
Coefficient of thermal conductivity at 200 °C [1/ °C] 10,5
Density [g/cm3] 4,49
The modulus of elasticity of 1 of the kind E [MPa]x10-5 1,12

Limit crackbrain. strength sin [MPa] Sheet


Limit crackbrain. strength sin [MPa] Rod

Electrical resistivity, Mhmm2/m Of 1.08

Buy at best price

When choosing titanium alloys should take into account a number of factors. The company «AVEK global» there is a wide range of titanium mill products under the order. Our experts are always ready to help You in selecting the required products, which determines the efficiency and reliability of future equipment. Here You can purchase products on the most favorable terms. Our experts will not only help You to determine the optimal parameters of products, but also offer the best price. We also guarantee high quality products and timely delivery.