- Mainpage
- Directory
- Titan
- Titanium, titanium products
Forgings titanium
Forging is a casting, which is forged to give the necessary shape, removal of shrinkage cracks, shells. The time spent on additional technological operations gives greater reliability and profitability to the equipment.
Benefits
Titanium forging has an exceptional mechanical strength, easily tolerates the effect of soil, atmospheric moisture, fatigue loads, heat-resistant, elastic under deformations, and is stable in corrosive environments. It is indispensable in many areas of modern production.
disadvantages
High cost of titanium products is associated with the complexity of obtaining this metal in its pure form, as well as the laboriousness of its processing. But the durability and reliability of such products pays off hundredfold.
Production
There are two ways of producing forgings: pressing (hammer forging — metal is freely located on the surface of the anvil), punching — the metal is deformed in the walls of the bounding stamp. The method of stamping gives higher accuracy, and the method of forging — higher strength, plasticity. The strength of titanium alloys, as well as of other metals, depends both on the initial qualities and on the forging and thermal process.
Especially important is the quality control of products during forging. Since titanium readily reacts with oxygen in hot form, it must be protected from contact with various atmospheric gases: O 2, N 2, H 2 during forging.
| Percent composition | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Make | Al | Ti | V | Zr | Sn | Mo | Mn | Fe | Si | Cr | O | C | N | Others | |
| BT1−00 | the basis | 0,15 | 0.08 | 0.1 | 0.05 | 0.04 | 0.1 | ||||||||
| VT1−2 | the basis | 1.5 | 0,15 | 0.3 | 0.1 | 0,15 | 0.3 | ||||||||
| VT1−0 | the basis | 0.3 | 0.1 | 0.2 | 0.1 | 0 | 0.3 | ||||||||
| VT3−1 | 5.5−7.0 | the basis | 0.5 | 2.0−3.0 | 0.2−0.7 | 0.15−0.40 | 0.8−2.0 | 0,15 | 0.1 | 0.05 | 0.3 | ||||
| OT4−0 | 0.4−1.4 | the basis | 0.3 | 0.5−1.3 | 0.3 | 0.12 | 0,15 | 0.1 | 0.05 | 0.3 | |||||
| OT4 | 3.5−5.0 | the basis | 0.3 | 0.8−2.0 | 0.3 | 0.12 | 0,15 | 0.1 | 0.05 | 0.3 | |||||
| OT4−1 | 1.5−2.5 | the basis | 0.3 | 0.7−2.0 | 0.3 | 0.12 | 0,15 | 0.1 | 0.05 | 0.3 | |||||
| VT5−1 | 4.3−6.0 | the basis | 1 | 0.3 | 2.0−3.0 | 0.3 | 0.12 | 0,15 | 0.1 | 0.05 | 0.3 | ||||
| VT5 | 4.5−6.2 | the basis | 1.2 | 0.3 | 0.8 | 0.3 | 0.12 | 0.2 | 0.1 | 0.05 | 0.3 | ||||
| VT6 | 5.3−6.8 | the basis | 3.5−5.3 | 0.3 | 0.6 | 0.1 | 0.2 | 0.1 | 0.05 | 0.3 | |||||
| VT8 | 5.8−7.0 | the basis | 0.5 | 2.8−3.8 | 0.3 | 0.20−0.40 | 0,15 | 0.1 | 0.05 | 0.3 | |||||
| VT6s | 5.3−6.5 | the basis | 3.5−4.5 | 0.3 | 0.25 | 0,15 | 0,15 | 0.1 | 0.04 | 0.3 | |||||
| VT9 | 5.8−7.0 | the basis | 1.0−2.0 | 2.8−3.8 | 0.25 | 0.20−0.35 | 0,15 | 0.1 | 0.05 | 0.3 | |||||
| VT16 | the basis | ||||||||||||||
| VT14 | 3.5−6.3 | the basis | 0.9−1.9 | 0 | 2.5−3.8 | 0.3 | 0.2 | 0.2 | 0.1 | 0.1 | 0.3 | ||||
| VT22 | 4.4−5.7 | the basis | 4.0−5.5 | 0.3 | 4.0−5.5 | 0.5−1.5 | 0,15 | 0.5−1.5 | 0.18 | 0.1 | 0.05 | 0.3 | |||
| VT20 | 5.5−7.0 | the basis | 0.8−2.5 | 1.5−2.5 | 0.5−2.0 | 0.25 | 0,15 | 0,15 | 0.1 | 0.05 | 0.3 | ||||
| PT-1M | the basis | ||||||||||||||
| PT-7M | 1.8−2.5 | the basis | 2.0−3.0 | 0.25 | 0.12 | 0,15 | 0.1 | 0.04 | 0.3 | ||||||
| PT-3B | 3.5−5.0 | the basis | 1.2−2.5 | 0.3 | 0.25 | 0.12 | 0,15 | 0.1 | 0.04 | 0.3 | |||||
| 2B | 1,5−2,5 | the basis | 1.0−2.0 | 0.2 | 0.1 | 0.12 | 0.7 | 0.04 | 0.3 | ||||||
| 5B | 4.7−6.3 | the basis | 1.0−1.9 | 0.1 | 0.7−2.0 | 0.25 | 0.12 | 0.13 | 0.06−0.14 | 0.04 | 0.3 | ||||
| 3M | 0.2−0.7 | the basis | 3.5−5.0 | 0.3 | 0.2 | 0.1 | 0,15 | 0.1 | 0.04 | 0.3 | |||||
| 14 | 3.5−5.6 | the basis | 0.5−2.5 | 0.3 | 0.25 | 0.12 | 0,15 | 0.1 | 0.04 | 0.3 | |||||
| AT3 | 2.0−3.5 | the basis | 0.20−0.40 | 0.2−0.5 | 0,15 | 0.1 | 0.05 | 0.3 | |||||||
| 40 | 1.5−3.5 | the basis | 0.5−2.5 | 0.3 | 0.25 | 0.12 | 0.14 | 0.07 | 0.04 | 0.3 | |||||
| JV 17 | 5.1 | the basis | 1.4 | 5.6 | |||||||||||
Application
Titanium forgings, die forgings make disks, blocks, cylinders, hexahedrons, bushings, circles, profiles, contour rings, flanges for the needs of aerospace, aviation, chemical, defense, oil refining, automotive, engineering.
Buy at a bargain price
A large assortment of high-quality titanium rolled products, forgings, stamping in stock Avek Global LLC is able to satisfy wholesale and retail customers. The quality of the finished products is ensured by absolute observance of all technological production standards. Under the order is carried out: heat treatment, special finishing, chemical and machine processing-milling, drilling, reaming, threading, sawing, turning, drilling, boring, double disk grinding, duplex milling. Cutting services include: visible abrasive cutting, cold, thermal, powder, plasma, surface air arc cutting, laser and hydroabrasive cutting. Heat treatment for forgings includes quenching, normalization, annealing, tempering, sub-zero annealing, and sealing of the surface. The lead time for orders is minimal. If you have any questions, you will receive an exhaustive consultation from experienced managers. With bulk orders, the company provides discounts.