• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Sheet, strip 6KHS - 60MnSi4 - 6hs

Sheet, strip 6KHS - 60MnSi4 - 6hs

Technical specifications

Steel tool stamping. Not applicable for welded structures, sensitive to flock formation, prone to temper brittleness: Hardness after annealing HB 10 -1 = 229 MPa. The temperature of the critical points of the material: Ac 1 = 770, Ac 3 (Acm) = 830, Mn = 250

Heat treatment

Tempering 880 ° C, oil, tempering 500 ° C, 2 hours,

Mechanical properties (temperature 20 ° C)

  1. sv — Short-term strength limit: 1400 MPa
  2. sT — Proportionality limit (yield stress for permanent deformation): 1250 MPa
  3. d5 — Elongation at break: 8%
  4. y — Relative narrowing: 30%
  5. KCU — Impact strength: 390 kJ / m 2

Using

The production of pneumatic hammer chisels and small-sized stamps for cold stamping, the production of knives.

Percent composition, GOST 5950−2000

Fe C Si Mn Ni S P Cr Mo W V Ti Cu
basis 0.6 — 0.7 0.6 — 1 0.15 — 0.45 ≤0.4 ≤0.03 ≤0.03 1 — 1.3 up to 0.2 ≤0.2 ≤0.15 ≤0.03 ≤0.3

Foreign analogues

Germany (DIN, WNr): 60MnSi4.

Buy

Supplier Avgloft offers a sheet, a strip of mark 6ХС, 60MnSi4, 6hs at a bargain price. The supplier guarantees the timely delivery of products to any specified address. Regular customers can take advantage of discount discounts. The price is the best in this segment of rental.

Delivery, price

Buy a sheet, brand 6XS, 60MnSi4, 6hs at an affordable price from the supplier Avgob today. The price is formed on the basis of European production standards. Vendor Avlob offers to buy a sheet, a strip of mark 6ХС, 6hs at the optimal price in bulk or at retail.