KHN60JU - ЭИ559А sheet, round, wire
Heat-resistant and heat-resistant alloy grade ХН60Ю (or ЭИ559А) is used in the manufacture of parts of gas pipeline systems, equipment with a short period of operation at a temperature of 1250 ° C and a limited period of operation at a temperature of 1100 ° C.
Chemical properties of ХН60Ю, according to GOST 5632−72 in percent.
|Up to 0.02||55 — 58||15 — 18||Up to 0.1||2.6 — 3.5||Up to 0.8||Up to 0.1||19.13 — 27.4||Up to 0.3||Up to 0.02||Up to 0.03|
Mechanical characteristics of ХН60Ю at temperatures of 20 ° C.
|Production||The size||Sv||D5||Y||For example.||ST||Heat treatment.||KCU|
|-||Mm||MPa||%||%||-||MPa||-||KJ / m2|
|— Strength of short-term, in [MPa]||Sv|
|— Yield strength (limit of proportionality) for permanent deformation, in [MPa]||ST|
|— at break, the relative elongation, in [%]||D5|
|— the restriction is relative, in [%]||Y|
|— Impact viscosity, in [kJ / m2]||KCU|
|— Brinell hardness, in [MPa]||HB|
Physical characteristics of alloy ХН60Ю.
|J / (kg · deg)||Grad||MPa||1 / Grad||Kg / m3||Ohm · m||W / (m · deg)|
|C||T||E 10−5||A 10 6||R||R 10 9||L|
|The physical characteristics of this grade of alloy:|
|— the first kind of modulus of elasticity, [MPa]||— E|
|— Heat capacity of the material (or coefficient of heat conductivity), in [W / (m · deg)]||-l|
|— The temperature required to obtain these properties, [Grad]||— T|
|— linear coefficient. Temper. Expansion in [1 / Grad] (temp. Interval 20 ° C),||-a|
|— electrical resistivity, in [Ohm · m]||-R|
|— The density of this material, [kg / m3]||-r|
|— Specific heat of the material in [J / (kg · deg)] (temp. Interval 20 ° C)||-C|
|— force coercive (not higher), in [A / m]||Hc|
|— permeability is magnetic (not higher), in [MH / m]||Umax|
|— loss of specific (not higher) frequency 50 Hz, magnetic induction 1.0 T, in [W / kg]||P1.0 / 50|
|— Magnetic Tl induction, the magnetic field strength is not less than 100, in a magnetic field, in [A / m]||B100|
|Bounded welding||— welding is possible during heating up to the tempo. 100−120 oC and thermal further processing|
|Compostable||— In order to obtain welded quality joints, it is necessary to perform additional operations: during welding, heating to temper. 200−300 ° C, heat treatment (annealing) after welding.|
|Welded without restrictions||— welding is carried out without thermal further processing and preheating.|
Buy at a bargain price
The company «Avek Global», which produces a large assortment of products from the alloy ХН60Ю is ready to satisfy the most complex inquiries of consumers. The wide application of products that are made from this alloy is due to high quality, great variety and affordable value. Absolute control of all stages of the technological process allows the company Avek Global LLC to produce guaranteed high-quality metal products. The introduction of modern technology gives us the opportunity, in addition to a wide base range, which is always available in the company’s warehouses, to take orders for the production of metal products by individual order, in case of high-quality metal products of non-standard options and sizes.