Are you interested in the 36H alloy ribbon from the supplier — AvecGlob Company? Here you will find the necessary information on this topic

To buy at a reasonable price from the manufacturer a ribbon made of a precision alloy grade 36H, offers the company AvekGlob. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

This alloy belongs to the group of alloys with given coefficients of temperature expansion. The alloy contains mainly nickel and iron, and maintains practically constant dimensions in the range of normal and lowered to cryogenic values of atmospheric temperatures. The alloy also has good strength and toughness at low temperatures. The upper limit of the expedient use of the alloy is +500 ⁰ C. The material is used for the manufacture of length standards for reference measurements,

thermostatic rods, components of laser installations for various applications, tanks and pipelines intended for storage and transport of liquefied gases. Produced by hot and cold rolling technology.

The chemical composition of the alloy, determined by the technical requirements of GOST 10994−74, is presented in the table (numerical data — in percent, iron — the rest);

AvekGlob Company sells a ribbon made from a precision alloy grade 36H at economically advantageous prices. the supplier ensures prompt delivery of products to any point installed by the customer.

Properties

Basic physical characteristics of the alloy:

Density, kg / m ³ — 8200;

Melting point, ⁰ С — 1450;

Temperature coefficient of linear expansion in the temperature range -100… + 300 ⁰ С, μm / deg — 1.1… 5.7;

Specific electrical resistance, Ohm — 8,010 ¹¹ ;

Modulus of elasticity, GPa — 155;

Coefficient of thermal conductivity, W / megade — 0,12510 ^-2 .

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 930;

Yield strength, MPa — 340;

Relative elongation at tension,% — 40;

Hardness according to Rockwell (scale B), no more than — 80.

Technological features of the alloy: machinability on metal cutting machines — satisfactory, welding is possible with the use of technology TIG (tungsten non-consumable electrode). To increase corrosion resistance, the alloy is used with a surface active layer of nickel-containing alloys 75HND or 20NG.

Buy at reasonable prices from the manufacturer of the ribbon of iron-nickel alloy grade 36H in a large range of transverse sizes offers the company AvekGlob. The Supplier carries out the guaranteed shipment of the products to any point agreed by the customer.