Do you want to buy a circle, wire from Inconel 686® alloy (Alloy 686, 2.4606) from the supplier — AvecGlob company? Here you will find the necessary information on this topic

Company Avecschlob sells at a reasonable price from the manufacturer a circle and wire, which are made of an Inconel 686® nickel alloy (other names are Alloy 686, 2.4606). The supplier is guaranteed timely delivery of products at any address specified by the consumer.

Composition and application

Inconel 686® (Alloy 686, 2.4606) is part of the group of nickel-chromium-molybdenum alloys, which are additionally doped with tungsten. This determines the exceptional corrosion resistance of the alloy under severe external operating conditions, including in oxidizing environments. The presence of molybdenum and tungsten enhances the resistance of the alloy under conditions of pitting corrosion.

Inconel 686® alloy (Alloy 686, 2.4606) is used for the production of gaskets, heat exchangers, air ducts, scrubbers, fans, pipe fittings, and also for the production of high-strength fasteners (flanges, bolts, studs, nuts, screws, washers, pins,). The alloy is used in the most severe conditions arising during chemical treatment, in the pulp and paper industry, in the processing of industrial and municipal waste.

The structure of the alloy is single-phase, austenitic. A fairly high percentage of iron, provides stability to all of the above properties, reduced

The percentage of carbon helps to minimize grain boundary deposition to maintain corrosion resistance in areas exposed to heat from welded joints. The resistance of total, point and crevice corrosion increases with the content of alloying (Cr + Mo + W) elements.

The chemical composition of the alloy, which meets the technical requirements of UNS N06686 and DIN EN 17744, is presented in the table:

Element Ni Cr Fe Mo P S Ti Mn Si C W

The minimum percentage is 19 15 — - 0.02 — - — 3

The maximum percentage of Basis 23 2 17 0.04 0.02 0.25 0.8 0.08 0.01 4.4

Buy at a reasonable price from the manufacturer of a circle or wire that are made of nickel alloy grade Inconel 686® (Alloy 686, 2.4606), offers the company AvekGlob. The supplier performs the operational dispatch of metal rolling to any point set by the client.

Properties

Basic physical characteristics of the alloy:

• Density, kg / m3 — 8730;

• Melting point, 0С — 1340… 1380;

• Specific heat capacity, J / kg • grad — 370;

• Coefficient of thermal conductivity, W / m • grad — 11.9;

• Modulus of elasticity, at temperatures 20… 7000С, respectively, GPa — 207… 165.

Basic mechanical characteristics of the alloy:

• Limit of time resistance, MPa — 740;

• Yield strength, MPa — 396;

• Relative elongation at tension,% — 65;

• Brinell hardness, HB, not more than — 323.

Technological features — temperature range of forging — 870… 12300С.

AvekGlob company offers to buy at affordable prices from the manufacturer a circle, wire from the alloy of the brand Inconel 686® (Alloy 686, 2.4606). The supplier guarantees immediate delivery of the products to any point agreed by the customer.