Circle, wire, pipe alloy 45 - 2.4889
Company AvecGlob sells at a reasonable price from the manufacturer a circle, wire and pipe, made of chromium-nickel alloy Alloy 45 (2.4889). The supplier guarantees the timely delivery of products to any address specified by the consumer.
Composition and application
Alloy 45 (registered trademark Nicrofer 45®) is a corrosion-resistant austenitic alloy with a specified coefficient of thermal expansion. It is used in high-temperature applications with extremely aggressive media, such as corrosive oils, combustible gases, sulfur dioxide, corrosion solutions based on caustic soda, etc. Products from this alloy are used in the production of waste incineration plants, furnaces for oil refineries, in the chemical industry (coal gasification equipment), and in the building materials industry (non-metallic raw materials kilns). It is used in the manufacture of protective coatings for electrodes.
The alloy 45 is intended for preliminary plastic deformation of nickel blanks, and is usually supplied in the annealing state. 2.4889 is the numerical designation EN for this material, N06045 is the UNS standard number.
The chemical composition of alloy Alloy 45 (2.4889) is given in the following table:
| C no more, % |
Si % |
Mn no more, % |
P no more, % |
S no more, % |
Cr % |
Ni not less than,% |
||
| 0.05−0.12 | 2.5… 3.0 | 1.0 | 0.02 | 0,011 | 26.0−29.0 | 45.0 | ||
| Al no more. % |
Co % |
Cu no more, % |
N % |
Fe % |
Ce % |
|||
| 0.2 | footprints | 0.3 | footprints | 21.0… 25.0 | 0.03… 0.08 |
Buy at a reasonable price from the manufacturer of a circle, wire or pipe, which are made of alloy Alloy 45 (2.4889), offers the company AvekGlob. Supplier provides prompt delivery of products to any point set by the client.
Properties
Basic physical characteristics of the alloy:
Density, kg / m 3 — 8000;
Melting point, 0 С — 1350;
Specific heat capacity, kJ / kggrad — 480;
Coefficient of thermal expansion, μm / degree — 13;
Coefficient of thermal conductivity, W / megade — 13;
Modulus of elasticity, GPa — 200.
Mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 690;
Yield strength, MPa — 270;
Relative elongation at tension,% — 37%
Hardness by Rockwell (scale B), not more than 85.
Technological features of the alloy: maximum application temperatures — up to 500 0 C when used in furnaces, from -195 0 C to +950 0 C — when used in containers for storage of liquids or liquefied gases.
Company Avecglob proposes to purchase at affordable prices from manufacturers a circle, wire or pipe, made of alloy Alloy 45 (2.4889). The supplier makes immediate delivery of the products to any point agreed by the customer.