• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

Precision tape

Precision tape

Do you want to buy a precision tape from a supplier — the company AvecGlob? Here you will find the necessary information on this topic

Buy at affordable prices from manufacturers of precision tape in a wide range and various grades of alloys offers the company AvecGlob. The supplier guarantees the prompt delivery of products to any address specified by the consumer.

General information

Precision tape is usually produced by cold rolling methods of stainless and heat-resistant steel (including duplex) with a width of more than 650 and a thickness of 0.002 to 1.5 mm for complex technical applications. With similar geometric characteristics, a precision tape is also produced from non-ferrous metals and alloys.

The main parameters of the precision tape are:

Stronger tolerances on the mechanical strength of the material;

Increased requirements for surface texture;

Higher tolerances for non-flatness of the surface.

Typical applications of precision tape:

Complex configurations of products with elements of deep drawing;

Electrical Connectors:

Needles for hypodermic injections;

Pressure tanks for pharmaceuticals;

Technical springs with specified operating stress levels.

Precision tape is available in most austenitic and ferritic grades, and many of them are available in the form of high-purity grades of steels and alloys. At the request of the customer, precision belts made of terboymetalla can be made.

AvekGlob Company sells precision tape in assortment of brands and transverse dimensions at economically reasonable prices. The supplier ensures the prompt shipment of products to any point set by the client.

Features of the technological process

Precision tape is produced by cold rolling, after which, depending on the customer’s requirements, the semi-finished product can undergo heat treatment — light annealing, or hardening treatment (compression or training). Edges of such tapes are extremely edging.

The semi-finished product is supplied in coils with an internal diameter of 200, 300, 400 and 500 mm, depending on the width and thickness of the tape. If desired, the inner diameter can vary, with the weight of one coil not exceeding 10 kg.

The condition of the cutting edges of the precision tape can be as follows:

Sharp edges;

Zaovalennye from one end;

Zaovalennye from both ends.

Tolerances on the width and thickness of precision tapes of domestic production are established in accordance with the technical requirements of GOST 503−81, GOST 4986−79 and GOST 21996−76. For precision imported tape, the dimensions and tolerances are set according to EN 10258 (DIN 59381). By the same standards, the mechanical strength of the precision tape material is also established.

Company Avecglob offers to purchase at a reasonable price from the manufacturer a precision tape made from any grade of steel and alloys. The supplier provides immediate delivery of products to any point agreed by the customer.