• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

VT5-1 titanium circle, rod, sheet

VT5-1 titanium circle, rod, sheet

Do you want to buy a circle, rod, sheet of alloy VT5−1 from the supplier — the company AvecGlob? Here you will find the necessary information on this alloy

Buy at an affordable price from the manufacturer of a variety of rolled products — a circle, rod or sheet — made of titanium alloy grade VT5−1, offers the company AvekGlob. The supplier ensures the timely delivery of products to any address specified by the consumer.

Composition and application

The deformable titanium α-alloy of VT5−1 grade is of low weight and has excellent corrosion resistance, very high tensile strength and toughness. These properties do not change significantly even at extreme temperatures. The operational durability of parts made of the produced alloy makes them competitive in such industries as aerospace, military, automotive, consumer electronics and sports equipment.

Alloy VT5−1 has a maximum operating temperature of 480 ° C, with an average strength. This alloy has good resistance to oxidation and resistance to changes in microstructure during thermal changes. From the considered alloy, hull details of airplanes and jet engines are produced. The boundary temperature of the use of products made of alloy VT5−1 is 450 ° C.

The chemical composition of alloy VT5−1, which meets the technical requirements of GOST 19807−91, is presented in the table (numerical data — in percent, titanium — base):

C Si V N Al Zr O (related) Sn H (bound) Impurities
Not more than 0.3 Not more than 0.1 Not more than 0.12 Not more than 1 Not more than 0.05 4.3 — 6 Not more than 0.3 Not more than 0.15 2 — 3 Not more than 0.015 Up to 0.3

Company Avecglob proposes to purchase at economically favorable prices from the manufacturer bars, circle and sheet, which are made of deformable titanium alloy grade VT5−1. The Supplier organizes prompt dispatch of the rental to any point set by the client.


Basic physical characteristics of the alloy:

Density, kg / m 3 — 4480;

Melting point, 0 С — 1590;

Coefficient of thermal expansion in the temperature range 0… 100 0 С, μm / deg — 9,4;

Coefficient of thermal conductivity, W / megade — 7,8;

Modulus of elasticity, GPa — 110… 125.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 745… 900;

Yield strength, MPa — 290… 380;

Relative elongation at tension,% — 10… 15;

Relative narrowing of the cross-sectional area. % — 15… 25;

Hardness according to Brinell, HB, not more — 321;

Impact strength, kJ / m 2 — 400… 450.

Technological features of the alloy — weldability — good; the alloy differs by a narrow temperature range of forging modes: from 980 to 1010 0 C. It does not yield heat treatment.

Company Avecglobal sells at a reasonable price from the manufacturer a circle, bar and sheet of titanium alloy brand VT5−1. The supplier makes immediate delivery of the products to any point agreed by the customer.