Company Avecglobal sells at affordable prices from manufacturers of sheet metal (sheet or tape), which is made of alloy Nimonic 263 (other names — Alloy C-263, 2.4650). The supplier is guaranteed timely shipment of products to any address specified by the consumer.

Composition and application

Nimonic 263 (Alloy C-263, 2.4650) is an aging-hardened nickel-cobalt-chromium-molybdenum alloy that was designed to maintain a high level of its performance after annealing and with very good strength properties after aging.

Nimonic 263 alloy products have excellent plastic viscosity over a wide range of temperatures, and are usually not subject to deformation cracking, which is characteristic of other hardening alloys of this type. The alloy is nonmagnetic. The limiting temperature range of application — according to the resistance of high-temperature corrosion — no more than 960 ° C, in combination with mechanical loads — up to 815 ⁰ С.

The alloy Nimonic 263 (Alloy C-263, 2.4650) is characterized by an increased ability to form plastic in a wide temperature range. Electric welding of products from this alloy is possible using a suitable composite filler technology TIG and MIG.

This alloy combines properties that make it suitable for various components of aircraft turbines. From the alloy under consideration, various sealing elements as well as critical parts of gas power equipment are produced.

The chemical composition of the alloy Nimonic 263 (Alloy C-263, 2.4650), which meets the technical requirements of the standards UNS N07623 and AMS 5872, is presented in the table (nickel — the rest):

Company Avecglob proposes to buy at a cost-effective producer prices sheet and tape made of nickel alloy Nimonic 263 (Alloy C-263, 2.4650). The Supplier provides prompt shipping of rolled products to any point set by the customer.

Properties

Basic physical characteristics of the alloy:

Density, kg / m ³ — 8360;

Melting point, ⁰ C — 1325;

Coefficient of thermal expansion with a temperature range of 20… 100 ⁰ С, μm / deg — 10,6;

Modulus of elasticity, GPa — 222.5;

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 963;

Yield strength, MPa — 271;

Relative elongation at tension,% — 22;

Relative narrowing of the cross-sectional area,% — 33;

Hardness according to Brinell, HB, not more — 322.

Technological features: the alloy in terms of high-temperature strength is inferior to alloys of Waspaloy or Rene 41 grades, but surpasses them in terms of plasticity.

Buy at affordable prices from manufacturers of sheet products — sheet or tape, which are made of nickel alloy Nimonic 263 (Alloy C-263, 2.4650), offers the company AvecGlob. The Supplier organizes an immediate delivery of the rental to any point. stipulated by the customer.