Grid and Connection Help
Are you interested in grids and connections — types and characteristics — from the supplier Avek Globe? We guarantee high quality products and a large selection of rolled metal products with worldwide delivery.
The main types of compounds in technology
Anchor — the device by which the lattice grid is attached to its supports;
A flat rod welded to the end of the lattice panel or along the cut line, and not passing either above or below the support rods;
Bearings are load-bearing rods made of a steel strip or sheet sheet or of rolled or extruded aluminum and extending in the direction of the grill passage;
Bearing centers;
Media — stair elements that are welded to the trellis panel, and hold the hub step, attaching to the stringer of the staircase;
Crossings are connecting rods made of a steel strip, sheet or strip of extruded aluminum that run across the support rods, usually perpendicular to them. They can be bent into a corrugated or sinuous pattern and, when they cross the support rods, are welded, stapled or mechanically locked onto them;
Compounds obtained by electrodeposition — a process that combines pressure and heating to trim / precipitate support rods and transverse rods into the grid of panels;
Lattices for chaff — aluminum or steel;
An open mesh of metal rods in which the support rods operating in the same direction are spaced apart from each other by rigid fastening to transverse bars perpendicular to them or curved connecting rods extending between them. Gratings made of aluminum rods, carbon steel gratings and stainless steel gratings;
Floor grid: it is usually an aluminum grate, the pressure on which is created by transverse and supporting rods that are in the same plane with respect to the upper surface of the grate;
Suspended panels are lattice panels that are pivotally attached to their supports or to other trellised parts.
Riveting centers — the pressure is distributed from the center to the center of the adjacent rivet along one support;
Toothed gratings are metal grilles that have upper surfaces of support rods or transverse rods or both, with a notch.
Welded gratings are a grid of rods, in which the supporting rods and transverse rods are connected at their intersections by a welded seam.
Supplier — AvekGlob Company — offers at a reasonable price from the manufacturer a diverse range of connections that comply with all technical requirements of the current regulatory documents. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Types of nets and their application
Metal grids for the vibrating screen are used to sort many products — iron ore, stones, grains, etc. The metal screen for the vibrating screen can be made of wire with a high content of carbon, galvanized or stainless steel. The user must know the distance between the wire, because it must be the same in the entire metal grid.
The metal screens of vibrating screens are also manufactured with a special finish. Wavy nets, also known as artistic metal mesh, can be made in various net gaps, from square or rectangular mesh, in rolls, pieces, disks. Multifilament mesh can be made of galvanized steel wire, stainless steel, aluminum, brass.
Wavy metal nets (or wire mesh) can be used for: splitting areas, protecting the engine or machine, windows, shelving, industrial baskets and others. The most common applications for a waveguide network are: courier recipients, heat treatment, heat transfer to boxes for air conditioners.
Welded metal mesh is made of galvanized wire or stainless steel. It is widely used for decorative finishing, protection of engines and machines, in construction, etc.
Supplier — AvekGlob Company — offers to purchase grids and connections in the range that meet the technical requirements of the relevant regulatory documents. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.