Supplier — AvekGlob company — offers wire, ribbon, rod made of brass ЛЖМц59−1-1 at reasonable prices from the manufacturer. The supplier guarantees timely delivery of products to any address specified by the consumer /

Technical specifications

Brass of the brand LVMts59−1-1 refers to complex-alloyed deformable copper-zinc alloys. The starting material for rolling or subsequent deformation is ingots produced by the methods of centrifugal casting. The material is characterized by increased strength, but lower anticorrosive performance. It shows (especially on heating) weak magnetic properties.

Urgency of application

The alloy is used in construction (production of corrosion-resistant equipment brackets), in the electrical industry with average air humidity. In general, mechanical engineering is used for the production of gears, parts of compressor plants, as a material of molding matrices and press stamps for the pulp and paper industry, in the weapon industry. Marine applications include propellers of small vessels, hulls of marine equipment, rudders, fasteners for boats (hooks, clamps), etc.

Chemical composition

It is shown in the table (numeric data — in percent). Standards meet the technical requirements of GOST 15527−2004:

Physical and mechanical properties

• density, kg / m ³ — 8360;
• melting point, ⁰ C to 890;
• coefficient of thermal expansion in the temperature range 20… 100 ⁰ С, μm / deg — 22;
• coefficient of thermal conductivity at room temperature, W / megade — 100.4;
• Brinell hardness, HB — 80… 130 (lower values for soft and pressed brass);
• the limit of the time resistance, MPa — 430… 490;
• yield strength, MPa — 100… 120;
• modulus of elasticity, GPa — 106;
• permissible tensile elongation,% — not less than 28… 15 (respectively for soft and hard brass).

Assortment and application features

The brass rod, circle and wire from the material in question are produced in a wide range of sizes and cross-section profiles. The brass grades ЛЖМц59−1-1 define GOST 10666−90 and GOST 2060−2007.

The machinability of the brass grade in question is medium, it is not recommended to use high-speed feeds of cutting tools. The temperature range of forging is 650… 750 ⁰ С.

Supplier — AvekGlob Company — offers to purchase bars, ribbons or wires that are made of brass of LMZh59−1-1 brand in a wide assortment of sizes and profiles of cross section. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.