- Nickel alloys
- Copper-Nickel alloys
Melchior Mn19 - pipe, sheet, tape
The company Avec Glob sells at various prices from manufacturers a variety of rolled products — pipe, sheet, tape, which are made of copper-nickel alloy Melkhior brand MN19. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Composition and application
Melchior MN19, produced in accordance with GOST 492−2006, is a copper alloy with nickel and zinc, additionally doped with brass, which gives the material
yellowish brown color. To improve the casting properties of the metal, the alloy also contains a limited amount of lead and tin.
Typical areas of use of the alloy is the production of various decorative objects and jewelry (jewelry). In industrial practice, nickel-grade MH 19 is used for the production of wind musical instruments, valves, components of precision optical equipment and instruments, fittings for the food and dairy industry, as well as consumer accessories (zippers) and fasteners — screws and rivets.
The alloy MN19 is distinguished by its high corrosion resistance and good workability, and therefore it is often produced parts of medical equipment and tools.
The chemical composition of the alloy MN19, which meets the technical requirements of the standard, is presented in the table (numerical data — in percent, copper — base):
|Ni + Co||Fe||C||Si||Mn||S||P||As||Pb||Mg||Zn||Sb||Bi||Impurities|
|18… 20||Not more than 0.5||Not more than 0.05||Not more than 0.15||Not more than 0.3||Not more than 0.01||Not more than 0.01||Not more than 0.01||Not more than 0.005||Not more than 0.05||Not more than 0.3||Not more than 0.005||Not more than 0.002||only 1.5|
Avec Glob Company sells a pipe, sheet and a tape of nickel alloy MH 19 at economically favorable prices from the manufacturer. The supplier ensures prompt delivery of the products to any point specified by the customer.
Basic physical characteristics of the alloy:
Density, kg / m 3 — 8900;
Melting point, 0 С — 1190;
The coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 16;
Modulus of elasticity, GPa — 140;
Coefficient of thermal conductivity at room temperature, W / megade — 38,5.
Basic mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 300… 390;
Yield strength, MPa — 100… 120;
Relative elongation,% — 25… 3;
Relative narrowing of the cross-sectional area,% — 43;
Hardness according to Brinell, HB, not more than — 117.
Technological features — plasticity of the alloy in the cold state — unsatisfactory, the temperature range of hot deformation is 900… 1030 0 С. Welding is possible only under a layer of flux — charcoal.Buy at reasonable prices from the manufacturers of pipe, sheet or tape, which are made of a copper-nickel alloy grade of MNH19, offers the company AvekGlob. The supplier makes immediate delivery of the products to any point agreed by the customer.