• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

36KNM ribbon, round, wire

36KNM ribbon, round, wire

Grade 36KNM relates to magnetically soft steels which have high corrosion resistance, high induction in medium and weak fields and low coercive force. A distinctive feature of the brand 36KNM alloy is highly resistant to corrosion and sufficiently high value of magnetic induction in weak fields. Basically, the alloy used in the manufacture of magnetic wires, which are operated in aggressive environments (sea water, etc.).

In its composition the alloy 36KNM, in addition to iron (base), includes cobalt (36%), Nickel (22%), molybdenum (2.9−3.3%). As alloying additives used alloy silicon manganese.

weldability limited — welding is possible in the process of heating up to temp. 100−120? C and further thermal treatment
konovalivka in order to obtain quality welded joints, it is necessary to perform additional operations: during welding heating up to temp. 200−300°C, heat treatment (annealing) after welding.
Welded without any restrictions — welding is carried out without further heat treatment and pre-heating.

The chemical composition of the alloy 36KNM, in percent.

P Cr V Ni C S Si Mo Mn Cu Al
to 0.015 to 0.15 to 0.1 35 — 37 to 0.05 to 0.015 to 0.3 to 0.1 0.3 — 0.6 to 0.1 to 0.1

The mechanical properties of the alloy 36KNM at 20 °C.

Products Size KCU y d5 sT blower SB Eg. Heat treatment.
GOST 14080−78 mm kJ / m2 % % MPa MPa - -
Nagarebana tape           930    
Mechanical characteristics:
— Short-term tensile strength in [MPa] blower SB
— Yield strength (limit of proportionality) for the residual strain, [MPa] sT
— at break elongation in [ % ] d5
— narrowing of the relative in [ % ] y
— the viscosity of the shock, in [ kJ / m2] KCU
— Brinell hardness [MPa] HB

Physical characteristics 36KNM.

l R 109 C r a 106 T E 10-5
W/(m·deg) Ohm·m J/(kg·deg) kg/m3 1/Deg Grad MPa
  420   8200   20 1.42
Physical characteristics of this brand of alloy:
— 1st kind of modulus of elasticity, [MPa] — E
— The temperature required to obtain these properties, [Grad] — T
— linear coefficient. temp. expansion (temp. the interval 20o), in [1/Deg] -a
— electrical resistivity, [Ohm·m] -R
— Material density, [kg/m3] -r
— The heat capacity of the material (or conductivity) [W/(m·deg)] -l
— Specific heat of material (temp. the interval 20o), in [j/(kg·deg)] -C

Magnetic characteristics:

the coercive force (not more than) [A/m ] Hc
the magnetic permeability (not above) [ MH/m ] Umax
— specific losses (no higher) frequency 50 Hz, magnetic induction of 1.0 T [ W/kg ] P1.0/50
— T magnetic induction intensity of a magnetic field of not less than 100, in a magnetic field [ A/m ] B100

Buy at best price

The range of products from alloy 36KNM, represented by LLC «AVEK global» can satisfy almost any consumer. This alloy belongs to the popular group of steel products due to its real value and variety of output options. Quality metal products is guaranteed absolute observance of all technological norms of production. In the absence of the base performance required of the product and if necessary other option products, we can produce custom sizes to order.