Sheet, strip CuNi10Fe1Mn - Mnzhmc10-1-1
Buy at affordable prices from the manufacturer of sheet metal (sheet and tape) in a wide range of profiles, made of copper-nickel alloy MNZhMts10−1-1 (the nearest foreign analogues — alloys CuNi10Fe1Mn, 2.0872 and C70600) is offered by AvecGlob. The supplier carries out timely delivery of products to any address specified by the consumer.
Composition and application
Copper-nickel non-magnetic alloy MNZhMts10−1-1 (CuNi10Fe1Mn, 2.0872, C70600) belongs to the category of nickel metals. It has excellent resistance to corrosion, erosion and cavitation, including in sea water. The alloy has good welding properties. Basically, the material is used for the manufacture of valves, pump components, fittings, flanges and other marine applications. Among other examples of effective use — body parts of heating devices, heat exchangers and condensers. Recently, from the alloy MNZhMts10−1-1 (CuNi10Fe1Mn, 2.0872, C70600) begin to produce and details of various electronic devices.
The alloy is produced by the technology of cold and hot rolling, and also in the form of forgings. Forgings made from this alloy are characterized by increased resistance to stress corrosion cracking.
The chemical composition of the alloy MNZhMts10−1-1, which is regulated by the technical requirements of GOST 492−2006 (for the analogs produced abroad, UNS C70600 and DIN EN 17664 are valid) is presented in the table (numerical data — in percent, copper — the rest):
Ni + Co
|9 — 11||12||Not more than 0.03||0.3 — 1||Not more than 0.03||Not more than 0.03||Not more than 0.3||only 0.5 (mostly tin and lead)|
Note. The total amount of cobalt should not exceed 0.1%.
AvekGlob company sells sheet metal or sheet, which is produced from copper-nickel alloy MNZhMts10−1-1 (or its foreign analogues — CuNi10Fe1Mn, 2.0872, С70600) at economically advantageous prices. The supplier ensures guaranteed shipment of products to any point set by the customer.
Basic physical properties of alloys:
Density, kg / m 3 — 8900;
Melting point, 0 С — 1090… 1125;
Coefficient of thermal conductivity, W / megade — 50;
The coefficient of thermal expansion in the temperature range 20… 200 0 С, μm / deg — 17.
Basic mechanical properties of alloys:
The limit of temporary resistance, MPa — 290… 350;
Yield strength, MPa — 190… 220;
Relative elongation at a stretching,% — 30… 22;
Hardness according to Brinell, HB, no more than 85.
Technological features: alloys are well welded under the flux layer, provided that Monel® 67 is used as the filler, and Monel® 187 for welding electrodes.
To buy at affordable prices from the manufacturer a sheet and tape of various thickness and width, made of copper-nickel alloy MNZhMts10−1-1 (or the closest foreign analogues — CuNi10Fe1Mn, 2.0872, C70600), offers the company AvekGlob. The supplier carries out the immediate delivery of rolled metal to any point agreed by the customer.