Would you like to purchase a sheet, titanium wire, SR3 Grade 2 (3.7035) from the supplier — AvecGlob Company? Here you will find the necessary information on this material

AvekGlob sells sheet or wire in a wide range of transverse sizes, which are made of titanium brand CP3 Grade 2 (another name is 3.7035) at affordable prices from the manufacturer. The supplier provides a guaranteed delivery of products to any address specified by the consumer.

Composition and application

Technically pure titanium Grade 2, also known as titanium CP3, has excellent corrosion resistance in oxidizing environments. Metal is also distinguished by excellent welding properties in combination with moderate strength and resistance to cryogenic temperatures.

Titanium CP3 Grade 2 (3.7035) has an alpha-crystalline structure. The alloy is widely used in industry, because it combines the ability to plastic deformation with moderate strength and increased corrosion resistance.

The density of titanium in this class is approximately 50% of the density of nickel alloys and stainless steels, which is used in the manufacture of aircraft.

Titanium grade 2 has excellent corrosion resistance in oxidizing environments, alkaline media, organic acids and compounds, aqueous salt solutions and hot gases. The alloy is distinguished by its corrosion resistance in nitric acid, soft reducing acids and wet chlorine or bromine gas. In addition, this metal perfectly resists corrosion processes that occur in chlorine-containing media, in particular, in sea water. This combination of characteristics provides titanium CP3 Grade 2 (3.7035) wide use in marine, oil and gas and chemical processing industries, as well as in medicine.

The titanium chemical composition of grade CP3 Grade 2 (3.7035), meeting the requirements of the UNS R50400 standard, is presented in the table:

Note. Oxygen, nitrogen and hydrogen are allowed only in the form of chemical compounds of titanium.

Company Avecglob proposes to purchase at a cost-effective price wire or sheet in a wide range of cross sections of titanium grade CP3 Grade 2 (3.7035). The supplier provides prompt delivery of rolled metal to any point set by the client.

Properties

Basic physical characteristics of metal:

Density, kg / m ³ — 4400;

Melting point, ⁰ С — 1650;

Coefficient of thermal conductivity, W / megade — 22;

Coefficient of thermal expansion, μm / deg — 8,9;

Specific heat capacity, J / kggrad — 550;

Modulus of elasticity, GPa — 110.

Basic mechanical characteristics of metal:

The limit of temporary resistance, MPa — 420;

Yield strength, MPa — 360;

Relative elongation at tension,% — 23;

Relative narrowing of the cross-sectional area,% — 37;

Hardness according to Rockwell, scale B, no more than 30.

Buy at an affordable price wire and sheet, which are produced from titanium brand CP3 Grade 2 (3.7035), offers the company AvekGlob. The supplier immediately delivers the products to any point agreed by the customer.