• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05
en

Consultant

Alexey
sales department
+38 (093) 727-19-11
Ask question

Subscription prices and deals

You can always disable the notification by clicking here

Alloy 45 - 2.4889 sheet, ribbon

Alloy 45 - 2.4889 sheet, ribbon

Do you want to buy a sheet, a tape of alloy 45 (2.4889) from the supplier — the company AvecGlob? Here you will find the necessary information on this topic

AvekGlob Company sells sheet and tape made of chromium-nickel alloy Alloy 45 (2.4889) at reasonable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

Alloy 45 (registered trademark Nicrofer 45®) is a corrosion-resistant austenitic alloy with a specified coefficient of thermal expansion. It is used in high-temperature applications with extremely aggressive media, such as corrosive oils, combustible gases, sulfur dioxide, corrosion solutions based on caustic soda, etc. Products from this alloy are used in the production of waste incineration plants, furnaces for oil refineries, in the chemical industry (coal gasification equipment), and in the building materials industry (non-metallic raw materials kilns). It is used in the manufacture of protective coatings for electrodes.

The alloy 45 is intended for preliminary plastic deformation of nickel blanks, and is usually supplied in the annealing state. 2.4889 is the numerical designation EN for this material, N06045 is the UNS standard number.

The chemical composition of alloy Alloy 45 (2.4889) is given in the following table:

C
no more, %		 Si
%		 Mn
no more, %		 P
no more, %		 S
no more, %		 Cr
%		   Ni
not less than,%		  
0.05−0.12 2.5… 3.0 1.0 0.02 0,011 26.0−29.0   45.0  
    Al
no more. %		 Co
%		 Cu
no more, %		 N
%		 Fe
%		 Ce
%		  
    0.2 footprints 0.3 footprints 21.0… 25.0 0.03… 0.08  

Buy at economical prices from the manufacturer of sheet or tape, which are made of alloy Alloy 45 (2.4889), offers the company AvekGlob. Supplier provides prompt delivery of products to any point set by the client.

Properties

Basic physical characteristics of the alloy:

Density, kg / m 3 — 8000;

Melting point, 0 С — 1350;

Specific heat capacity, kJ / kggrad — 480;

Coefficient of thermal expansion, μm / degree — 13;

Coefficient of thermal conductivity, W / megade — 13;

Modulus of elasticity, GPa — 200.

Mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 690;

Yield strength, MPa — 270;

Relative elongation at tension,% — 37%

Hardness by Rockwell (scale B), not more than 85.

Technological features of the alloy: maximum application temperatures — up to 500 0 C when used in furnaces, from -195 0 C to +950 0 C — when used in containers for storage of liquids or liquefied gases.

AvekGlob company offers to buy at affordable prices from producers a sheet or tape made of alloy Alloy 45 (2.4889). The supplier makes immediate delivery of the products to any point agreed by the customer.

Products for sale