36H - alloy 36 sheet
To get at a reasonable price from the manufacturer a sheet made of precision alloy grade 36H, offers the company AvekGlob. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Composition and application
Alloy grade 36 H is included in the group of alloys, which differ in the constant values of the coefficient of temperature expansion. The alloy contains mainly nickel and iron, and maintains practically constant dimensions in the range of normal and lowered to cryogenic values of atmospheric temperatures. A characteristic feature of the alloy is also its good strength and toughness at low temperatures. The upper limit of the expedient use of the alloy is +500 0 С. This material is used for the manufacture of length standards for reference measurements, in the manufacture of thermostatic rods, components of laser installations for various applications, tanks and pipelines intended for storage and transportation of liquefied gases. Produced by hot and cold rolling technology.
The chemical composition of the alloy, determined by the technical requirements of GOST 10994−74, is presented in the table (numerical data — in percent, iron — the rest);
|Not more than 0.05||Not more than 0.3||0.3… 0.6||35… 37||Not more than 0.015||Not more than 0.015||Not more than 0.15||Not more than 0.1||Not more than 0.1||Not more than 0.1||Not more than 0.1|
AvekGlob company sells a sheet made of precision 36M alloy from producers at economically advantageous prices. The supplier ensures prompt delivery of products to any point set by the client.
Basic physical characteristics of the alloy:
Density, kg / m 3 — 8200;
Melting point, 0 С — 1450;
The coefficient of thermal linear expansion in the temperature range -100… + 300 0 С, μm / deg — 1.1… 5.7;
Specific electrical resistance, Ohm — 8,010 11 ;
Modulus of elasticity, GPa — 155;
Coefficient of thermal conductivity, W / megade — 0,12510 -2 .
Basic mechanical characteristics of the alloy:
The limit of temporary resistance, MPa — 930;
Yield strength, MPa — 340;
Relative elongation at tension,% — 40;
Hardness according to Rockwell (scale B), no more than — 80.
Technological features of the alloy: machinability on metal cutting machines — satisfactory, welding is possible with the use of technology TIG (tungsten non-consumable electrode). To increase the corrosion resistance, 36N alloy is recommended to be used with a surface active layer of nickel-containing alloys 75HND or 20GN.
Buy at an affordable price from the manufacturer sheet of iron-nickel alloy grade 36H in a large range of transverse sizes and lengths offers the company AvekGlob. The Supplier carries out the guaranteed shipment of the products to any point agreed by the customer.