- Mainpage
- Directory
- Nickel alloys
- Nichrome and Fechral
Nichrome wire Х15Н60 - 2.4867 - nikrothal 60®
Properties of Nichrome brand X15N60-N
— high electrical resistance;
— increased resistance to formation of oxide, thermal fatigue, scale at 1200 ° C;
— high resistance to thermal changes.
Using
Furnaces for drying and firing, high temperature furnaces, resistance elements, industrial heaters, heaters.
| Designation | NiCr 60 15 | |
|---|---|---|
| Material | 2.4867 | |
| ALLOY | Ni60Cr15 | |
| DIN | 17470/17471 | |
| ASTM | --- | |
| UNS designation | N06004 | |
| AMS | --- | |
| CHEMICAL STABILITY OF BRAND X15N60-N, (%) | ||
| Ni (Nickel) | Not more than 59.0 | |
| Cr (Chrome) | From 14.0 to 17.0 | |
| Fe (Iron) | The basis | |
| C (Carbon) | Not higher than 0.10 | |
| Mn (Manganese) | Not higher than 1.0 | |
| Si (Silicon) | From 1.0 to 1.75 | |
| Cu (Copper) | Not higher than 0.5 | |
| Al (Aluminum) | Not higher than 0.3 | |
| Ti (Rare Earth) | Not more than 0. 04 | |
| Rest | --- | |
| PROPERTIES MECHANICAL BRANCHES Х15Н60-Н AT ROOM TEMPERATURE | ||
| Relative extension | More than 20% | |
| Number of bends | More than 7 times | |
| PROPERTIES PHYSICAL BRANCHES Х15Н60-Н AT ROOM TEMPERATURE | ||
| Hardness | From 200 to 220 HB | |
| Density | 8.2 g / cm³ | |
| Breaking force | From 637 to 784 MPa | |
| Specific electrical resistance | 1.12 Ohm * mm2 / m | |
| Maximum Operating Temperature | 1150 ° C | |
| Melting temperature | 1390 ° C | |
| Magnetic properties | Weakly magnetic | |
| Diameter from 6,0mm | At Temp. = 1100 ° C | More than 4 thousand hours. |
| Diameter from 3,0 to 6,0mm | At the Temp. = 1050 ºС | More than 2 thousand hours. |
| Diameter from 1,5 to 3,0mm | At the Temp. = 1050 ºС | More than 2 thousand hours. |
| Diameter from 0,4 to 1,5mm | At the Temp. = 1050 ºС | More than 1 thousand hours. |
Buy at a bargain price
In the warehouse of Avek Global LLC there is a wide choice of heat-resistant alloys, which will satisfy any customer. Quality is guaranteed by full observance of technological norms of production. The lead time for orders is minimal. At wholesale purchases discounts are given. Deliveries are made directly from the warehouse. This gives consumers a clear choice of products, as well as significant savings in inventory and premises.