• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

ВТ35 circle, rod, sheet, wire

ВТ35 circle, rod, sheet, wire

Do you want to buy a circle, bar, sheet, VT35 alloy wire from AvecGlob? Here you will find the necessary information on this alloy

Company Avecglobal sells at various prices from manufacturers a variety of metal products — sheet, circle, wire and rod, which is made of titanium alloy gloom VT35. The supplier ensures guaranteed delivery of products to any address specified by the consumer.

Composition and application

Titanium-vanadium alloy grade VT35 belongs to the group of pseudo-β-titanium alloys with increased hardenability after heat treatment. In the initial state, it is fragile, so for the subsequent plastic treatment the material is subjected to quenching or aging, after which the blanks from this alloy can already be used in cold deformation processes. Used for the manufacture of complex, flat and bulk structures, which in the course of their operation undergo significant dynamic loads. The deformability of the alloy VT35 under heating is limited.

The alloy is used for the production of honeycomb assemblies and structures, as well as for the manufacture of shaped fasteners in aircraft engineering.

The alloy is well suited for machining on metal-cutting machines, as well as chemical-thermal processing processes.

The chemical composition of VT35 alloy, which meets the technical requirements of OST1−90013−81, is given in the table (numerical data — in percent, titanium — base):

Element Aluminum Carbon Chromium Hydrogen (bound) Molybdenum Nitrogen (bound) Oxygen (bound) Tin Vanadium Impurities
Content in the alloy 2… 4 Not more than 0,1 2… 4 Not more than 0,015 0.5… 2.0 Not more than 0,05

No more


2… 4 12… 14 Up to 0,3

Buy at economical prices a variety of rolled products — a circle, wire, sheet or rod — of titanium-vanadium alloy VT35 offers the company AvekGlob. The supplier makes timely delivery of products to any point set by the customer.


Basic physical characteristics of the alloy:

Density, kg / m 3 — 4800;

Melting point, 0 С — 1380… 1400;

Coefficient of thermal expansion, μm / deg — 16,1;

Coefficient of thermal conductivity, W / megade — 60;

Specific heat capacity, J / kggrad — 460.

Basic mechanical characteristics of the alloy:

Limit of time resistance, MPa — 1200;

Relative elongation at a stretching,% — 8… 12;

Relative narrowing of the cross-section,% — 15… 20;

Impact strength, kJ / m 2 — 250… 300.

Company Avecglob proposes to purchase at affordable prices from the manufacturer sheet and bulk metal (sheet, wire, rod and circle), which is made of titanium-vanadium alloy grade VT35. The supplier guarantees immediate delivery of the products to any point agreed by the customer.