• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05



Do you want to buy titanium alloys from a supplier — AvecGlob? Here you will find the necessary information on this topic

AvekGlob company sells titanium alloys in a wide range of brands and profiles at affordable prices from manufacturers. The supplier ensures the timely delivery of products to any address specified by the consumer.

General information about titanium alloys

The deformable titanium alloys are divided into four groups. The first include low-alloyed alloys, which, as a rule, have a low strength, not exceeding 600 MPa. They are used for the manufacture of products having a complex configuration, but not experiencing significant operating loads. The second group consists of titanium alloys with average strength parameters (up to 1000 MPa). Since they are still technologically processed, they do not require preliminary annealing. Such alloys are often used in the form of forgings, obtained by hot stamping. High-strength (with a tensile strength of more than 1000 MPa), titanium alloys of the third group are used only after softening heat treatment, and then again tempered. The fourth group consists of high-temperature titanium alloys, which have stably high strength and structural stability at high temperatures.

Technical requirements for titanium alloys of domestic production are regulated by the following basic standards:

GOST 19907−91 «Brands of titanium alloys»;

GOST 27265−87 «Welding wire made of titanium alloys»;

GOST 22178−76 «Sheets of titanium alloys»;

GOST 26492−86 «Bars of titanium alloys»;

GOST 22897−86 «Seamless cold-deformed pipes of titanium alloys»;

GOST 21945−76 «Pipes seamless hot-rolled from titanium alloys».

Buy at economical prices from the manufacturer of a variety of rolled titanium alloys offers the company AvekGlob. The supplier makes prompt delivery of products to any point established by the client.

Characteristic properties of titanium alloys

The density of titanium alloys depends on the number and density of alloying components. Beta-titanium alloys are heavy, as they contain alloying components such as molybdenum, tungsten, etc., which have a relatively high density. On average, the density of titanium alloys is between 4400… 4800 kg / m 3 .

The thermal conductivity of all titanium alloys is relatively small, and does not exceed 21.6 W m -1 K -1. The electrical resistance of titanium alloys is relatively large.

Specific heat capacity is in the range from 400 to 600 Joules Kg -1 .K -1 .

Like technically pure titanium, all titanium alloys are non-magnetic: the permeability is 1.00005… 1.0001 at 955 Hm- 1 .

The values of the modulus of elasticity usually range from 80 to 125 GPa, but this depends to a large extent on the technological process for the production of alloys.

The thermal conductivity of titanium alloys tends to increase at elevated temperatures, with most alloys showing an increase from 60 to 80% between ambient temperature and 500 ° C.

Company Avecglobal sells at a reasonable price from the manufacturer a variety of rolled products, made of titanium alloys. The supplier guarantees immediate delivery of products to any point agreed by the customer.