• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

FROM 4-0 - pipe, wire

FROM 4-0 - pipe, wire

AvekGlob Company sells pipes and wires at affordable prices from the manufacturer, which are made of titanium alloy OT4−0. The supplier carries out operative delivery of metal rolling to any address specified by the consumer.

Features of composition and application

Titanium alloy OT4−0 is a three-component pseudo-alloy of titanium of the «titanium-aluminum-manganese» system. Currently, the OT4−1 alloy is used for the production of various aerodynamic designs, as well as for other aerospace applications. The alloy, which has the effect of superplasticity, is a replacement for expensive alloys of titanium with aluminum and vanadium.

On this alloy tensile tests were carried out in the temperature range from 1073 to 1173 K (from 800 ° C to 900 ° C), in the strain rate range from 1 x 10−5 to 1 x 10−2 s-1, to characterize the high-temperature behavior of superplastic deformation. The maximum elongation of 450% is observed at 1123 K with an initial strain rate of 5.52 x 10−4 s-1, which indicates the superplastic behavior of this alloy. From the obtained tensile test results, the optimum superplastic temperature range is defined as 1098 K to 1148 K in the strain rate range 1.38 x 10−4 to 1.38 x 10−3 s-1.

Thus, the OT4−0 alloy is low-energy-intensive in processing, and provides practically the same performance as more expensive titanium-based alloys. The recommended temperature of application of parts made of OT4−0 alloy is 300… 350 0 С.

The chemical composition of the alloy, which meets the technical requirements of GOST 19807−91, is presented in the table (numerical data — in percent, titanium — base):

Fe C Si Mn N (bound) Al Zr O (related) H (bound) Impurities
Not more than 0.3 Not more than 0.1 Not more than 0.12 0.8 — 2 Not more than 0.05 3.5 — 5 Not more than 0.3 Not more than 0.15 Not more than 0.012 Up to 0.3

Buy a cost-effective pipe or wire, which are made of titanium alloy OT4−0, offers the company AvekGlob. The supplier guarantees timely delivery of products to any point. installed by the client.

Properties

Basic physical characteristics of the alloy:

Density, kg / m3 — 4550;

Melting point, 0 С — 1630;

Coefficient of thermal expansion in the temperature range of 100… 200 0 С, μm / deg — 8,6;

Coefficient of thermal conductivity, W / megade — 9,63.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 635… 685;

Yield strength, MPa — 360… 390;

Relative elongation at tension,% — 10… 20;

Relative narrowing of the cross-sectional area,% — 15… 25;

Impact strength, kJ / m 2 — 350… 400;

Hardness according to Brinell, HB, not more — 285.

Technological features of the alloy — deformability in the cold state — limited (alloy is brittle), weldability — without restrictions.

Buy at an affordable price from the manufacturer pipe and wire, which are produced from titanium alloy OT4−0, offers the company AvecGlob. The supplier provides immediate delivery of the rental at any point agreed by the customer.