• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05

32NKD - эи630А ribbon, round, wire

32NKD - эи630А ribbon, round, wire

Characteristics of the alloy.

Precision brand 33NK alloy with an average value of temperature coefficient of linear expansion is designed to connect the glass 72−4, mica, ceramics. 33NK alloy with an average value of the thermal linear coefficient EXT. (6,0−9,0)·10−6 deg-1 within the temperature range of from -70 to + 470 °C. Such grades as 33NK, 33NK-VI for use in the upgraded or newly created technology is not allowed with 01.01.91 g. the melting point of the alloy is 1450 °C.

Precision alloy is a metal alloy which has physical and mechanical unique characteristics (magnetic, elastic, thermal, electrical, etc.). Precision alloy has a number of properties characterizing the accuracy of the chemical. composition, thoroughness manufacturing and processing, the absence of various impurities. This category contains, as a rule, high-alloyed alloys. Precision alloy is mainly produced based on iron, Nickel, copper, niobium, cobalt. This group of alloys used in precision machine tools, in the production of various precision electronic devices, innovative technologies and laser equipment, household appliances, production of metrological and measuring instruments.

Welding:
weldability limited — welding is possible in the process of heating up to temp. 100−120? C and further thermal treatment
konovalivka in order to obtain quality welded joints, it is necessary to perform additional operations: during welding heating up to temp. 200−300°C, heat treatment (annealing) after welding.
Welded without any restrictions — welding is carried out without further heat treatment and pre-heating.

The chemical composition of the alloy NC 33, percent.

P S Ni Co Si C Fe Mn
to 0.015 to 0.015 32.5 — 33.5 16.5 — 17.5 to 0.3 to 0.05 48.22 — 51 to 0.4

The mechanical properties of the alloy 33NK at 20 °C.

Products Size KCU y d5 sT blower SB Eg. Heat treatment.
- mm kJ / m2 % % MPa MPa - -
GOST 14080−78 — nagarebana tape           930    
Mechanical characteristics:
— Short-term tensile strength in [MPa] blower SB
— Yield strength (limit of proportionality) for the residual strain, [MPa] sT
— at break elongation in [ % ] d5
— narrowing of the relative in [ % ] y
— the viscosity of the shock, in [ kJ / m2] KCU
— Brinell hardness [MPa] HB

The physical properties of the alloy 33 NK.

kg/m3 W/(m·deg) Ohm·m J/(kg·deg) MPa Grad 1/Deg
r l R 10 9 C E 10 — 5 T a 10 6
8200   420   1.42 20  
Physical characteristics of this brand of alloy:
— 1st kind of modulus of elasticity, [MPa] — E
— The temperature required to obtain these properties, [Grad] — T
— linear coefficient. temp. extensions to [1/Deg] (temp. the interval 20o), -a
— electrical resistivity, [Ohm·m] -R
— The density of this material, [kg/m3] -r
— The heat capacity of the material (or conductivity) [W/(m·deg)] -l
— Specific heat of material [j/(kg·deg)] (temp. the interval 20 ° C) -C

Magnetic characteristics:

the coercive force (not more than) [A/m ] Hc
the magnetic permeability (not above) [ MH/m ] Umax
— specific losses (no higher) frequency 50 Hz, magnetic induction of 1.0 T [ W/kg ] P1.0/50
— T magnetic induction intensity of a magnetic field of not less than 100, in a magnetic field [ A/m ] B100

Buy at best price

The range of products from the alloy 33NK represented in LLC «AVEK global» can satisfy almost any consumer. This alloy belongs to the popular group of steel products due to its real value and variety of output options. Quality metal products is guaranteed absolute observance of all technological norms of production. In the absence of the base performance required of the product and if necessary other option products, we can produce custom sizes to order.