Sheet, nitronik tape 50® - 1.3964 - alloy 50
Do you want to buy a sheet and tape from Nitronic 50® alloy from a supplier — AvecGlob Company? Here you will find the necessary information on this topic
Company AvecGlob offers at reasonable prices from the manufacturer sheet metal — sheet or tape — of stainless alloy Nitronic 50®. The supplier provides prompt delivery of products to any address specified by the consumer.
Composition and properties of the material
Stainless steel Nitronic 50® (other names — XM-19, Alloy 50, 1.3964) provides a combination of corrosion resistance and strength, not detectable in any other commercial materials available in the same price range. This austenitic stainless steel has a corrosion resistance greater than that of imported stainless steel grades 316, 316L, 317 and 317L, plus about twice the yield strength at room temperature.
Unlike many austenitic stainless steels, Nitronic 50® does not become magnetic when cold processed or cooled to low temperatures.
The excellent corrosion resistance ensures the Nitronic 50® grade steels are used in the petroleum, petrochemical and chemical industries, in devices for pumping liquid fertilizers, in reprocessing nuclear fuel. Rolled from this steel is also used in the pulp and paper, textile, food industries, as well as in the maritime industry.
Components that combine excellent corrosion resistance and high strength, include pumps, valves and fittings, fasteners, cables, chains, shields and wire cloth, marine equipment, boat and pump shafts, heat exchanger parts, springs and photographic equipment.
The chemical composition of Nitronic 50® steel, which meets the technical requirements of ASTM A193 and UNSS20910 standards, is presented in the table:
|Content in percent||Ni||Cr||Mo||Mn||Si||C||N||S||P||Cb||V||Fe|
Buy at economically reasonable prices sheet rolled products of stainless steel grade Nitronic 50® — sheet, tape — offers the company AvekGlob. The supplier guarantees timely delivery of products to any point set by the customer.
Basic physical characteristics of the material:
Density, kg / m 3 — 7880;
Melting point, 0 С — 1480;
The coefficient of thermal expansion in the temperature range 20… 700 0 С, μm / deg — 21,3;
The coefficient of thermal conductivity in the temperature range 20… 700 0 С, W / mgrad — 43,2;
Modulus of elasticity, GPa — 239.
Basic mechanical characteristics of the material:
The limit of time resistance. MPa — 322;
Yield strength, MPa — 123;
Relative elongation,% — 14;
Narrowing of the cross-sectional area under tension,% — 23;
Hardness according to Brinell, HB, not more — 313.
Technological features: in terms of machinability, stainless steel Nitronic® 50 does not differ from the rest of the austenitic steels, but requires lower speeds, higher power and increased rigidity due to the high rate of hardening. It is recommended to use carbide tools.
The temperature range of forging steel — 1177… 1204 ° C. Weldability of steel — good, (except for laser welding, because of the danger of saturation of the surface with gases).
AvekGlob company offers to buy at affordable prices a sheet or tape made of Nitronic® 50 stainless steel. The supplier immediately delivers the rolled products to any point agreed by the customer.