Do you want to buy a pipe, titanium wire Grade 9 Ti-3Al-2.5V (alloy 3.7195) from the supplier — the company AvecGlob? Here you will find the necessary information on this alloy

Avec Glob Company sells wire and pipe made from titanium Grade 9 of Ti-3Al-2.5V brand (also called alloy 3.7195) at reasonable prices from the manufacturer. The supplier ensures timely delivery of rolled metal to any address specified by the customer.

Composition and application

Titanium class 9 is a titanium single-phase α-alloy, intended for primary plastic deformation of forgings of various shapes and sizes. 3.7195 is the designation of this alloy according to the European standards DIN EN, R56320 is the designation of this alloy according to the UNS standard.

Due to the reduced percentage of aluminum and vanadium, the alloy is not practically hardened during the heat treatment, therefore, the increase in the mechanical characteristics of the material is achieved exclusively by cold plastic deformation. The titanium alloy Grade 9 of the brand Ti-3Al-2.5V (alloy 3.7195) has excellent corrosion resistance, which can be further increased by the introduction of 0.05% palladium or 0.1% ruthenium.

Products and this alloy are used in the aerospace industry, as well as used in equipment and equipment of chemical industries. It also produces details of sports equipment, car frames, etc.

The chemical composition of titanium alloy Grade 9 of the brand Ti-3Al-2.5V (alloy 3.7195) is given in the table:

Buy at a competitive price profile rolling — a pipe or wire, which is made of titanium alloy Grade 9 brand Ti-3Al-2.5V (alloy 3.7195), offers the company AvekGlob. The supplier performs an operational shipment of products to any point set by the customer.

Properties

Basic physical characteristics of the alloy:

Density, kg / m ³ — 4480;

Melting point, ⁰ С — 1600… 1640;

Specific heat capacity, J / kggrad — 550;

Coefficient of thermal conductivity, W / m degree — 8,1;

Coefficient of thermal expansion, μm / deg — 9.1;

Modulus of elasticity, GPa — 110.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 700… 960;

Yield strength, MPa — 430… 580;

Relative elongation at tension,% — 11… 17;

Relative narrowing of the cross-sectional area,% — 28;

Vickers hardness, N / V, not more than 300.

Technological features of the titanium alloy Grade 9 of the brand Ti-3Al-2.5V (3.7195): mechanical machinability — limited (intensive use of cooling media, slow processing speeds, high feed rates is desirable, it is desirable to use tools from hard alloys or high-speed steels). Weldability — without restrictions. The temperature range of forging is from 845 ° C to 900 ° C. The stampability of the alloy in the cold state corresponds to the plastic indices of austenitic stainless steels.

AvekGlob company offers to buy at affordable prices from the manufacturers a pipe or wire made of titanium alloy Grade 9 of the brand Ti-3Al-2.5V (3.7195). The supplier makes immediate delivery of products to any point. stipulated by the customer.