Supplier Avlob offers to buy sheet, tape 1.4532 — 15−7Ph® at an economical price. Regular customers can take advantage of discount discounts. The supplier guarantees the timely delivery of products to any specified address. The price is the best in this segment of rental.

Technical specifications

This brand is a nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion, it demonstrates high plasticity and toughness. Used for marine heat exchangers, chemical process tanks and pipelines, equipment for oil and gas production on the shelf. Specific gravity 7.7−8.03 g / cm3.

Percent composition, EN 10095−1999

Fe	C	Si	Mn	P	S	Cr	Mo	Ni	Al
basis	≤0.09	≤1,0	≤1,0	≤0,04	≤0,03	14.0 — 16	2 — 3	6.5 — 7.75	0.75−1.5

The steel is produced in an open arc furnace.

Doping

Doping optimizes the quality of steel. Chromium increases hardness, corrosion resistance, and nickel — plasticity; Molybdenum gives the alloy a reddishness, counteracts oxidation at high temperature, improves resistance to point and crevice corrosion in chloride media. Carbon content in the range from 0.04 to 0.08% provides higher strength at elevated temperatures.

Mechanical properties (temperature 25 ° C)

1. Poisson’s ratio: 0.27−0.30
2. Elasticity modulus: 190−210 (GPa)
3. Tensile strength: 1380 (MPa)
4. Yield strength for permanent deformation: 1210 (MPa)
5. Elongation at break. 1%
6. Hardness (HRC): 41 (min).

Thermal properties

1. Thermal expansion (10 ^-6 / ºC): 9
2. Thermal conductivity (W / mK): 15.1

Delivery, price

Buy sheet, tape 1.4532 — 15−7Ph® from the supplier Avgob can be at an affordable price. The price is formed on the basis of European production standards. Supplier Avlob offers to buy a corrosion-resistant sheet, the tape of the brand 1.4532 — 15−7Ph® in the assortment at the optimal price in bulk or at retail.