Are you interested in a sheet, a ribbon made of Nimonic 75 alloy (Alloy 75, 2.4630) from the supplier — AvecGlob company? Here you will find the necessary information on this topic

Company Avecglob proposes to purchase at affordable prices from the manufacturer sheet metal — sheet or tape — made of stainless alloy Nimonic 75 (other names — Alloy 75, 2.4630). The supplier guarantees the timely delivery of products to any address specified by the consumer.

Composition and application

Nimonic 75 (Alloy 75, 2.4630) is a dispersion-hardening nickel-chromium alloy of austenitic class with controlled additives of titanium and carbon. Nimonic 75 has good mechanical properties and resistance to oxidation at high temperatures. The feature of the alloy is good operational stability in any medium that requires resistance to high temperatures and corrosion while maintaining a sufficiently high level of mechanical properties.

The alloy in question is most often used for the production of sheet metal, the operation of which requires increased resistance to oxidation with sufficient high-temperature strength. The recommended temperature limit for the use of products made from this alloy is 810 ⁰ С (for a short time up to 980 ⁰ С).

Nimonic 75 (Alloy 75, 2.4630) is used in the manufacture of gas turbine engines,

for components of industrial furnaces, for equipment and devices for heat treatment, as well as for nuclear engineering. Aerospace fasteners and fittings include the Nimonic 75, as this material is capable of withstanding enormous mechanical stresses and high temperatures.

The chemical composition of the alloy, meeting the technical requirements of ASTM and UNS N06075 standards, is presented in the table:

Buy at economically advantageous prices sheet metal (sheet and tape), made of nickel-chrome alloy grade Nimonic 75 (Alloy 75, 2.4630) offers the company AvekGlob. The supplier provides prompt delivery of products to any point. installed by the client.

Properties

Basic physical properties of the alloy:

Density, kg / m ³ — 8370;

Melting point, ⁰ С — 1340… 1380;

The coefficient of thermal expansion in the temperature range 20… 100 ⁰ С, μm / deg — 11;

Modulus of elasticity, GPa — 206;

Coefficient of thermal conductivity, W / megade — 11,7.

Basic mechanical characteristics of the alloy:

The limit of temporary resistance, MPa — 750;

Yield strength, MPa — 275;

Relative elongation at tension,% — 42;

Technological features: for this alloy, conventional processing methods can be used. In cold plastic deformation, the alloy hardens.

The NIMONIC 75 alloy can be welded using common methods — manual arc welding, and welding in an inert gas using tungsten non-consumable electrodes. Before welding, the metal must be annealed. The temperature range of forging is 982… 1204 ° C.

Company Avecglobal sells at affordable prices sheet and tape made of stainless alloy Nimonic 75 (Alloy 75, 2.4630). The supplier makes immediate delivery of the rental to any point agreed by the customer.