Supplier — AvekGlob company — offers sheet and tape, which are made of AISI 410L stainless steel (1.4003), at an affordable price from the manufacturer. The supplier guarantees timely delivery of metal products to any address specified by the customer.

Technical specifications

Stainless steel AISI 410L (1.4003) is a low-carbon steel of the ferritic class, which is characterized by increased plasticity and sufficient resistance to abrasion. Its high corrosion resistance in comparison with carbon steels allows to reduce the maintenance costs and extend the service life of the products. A lower percentage of chromium limits the anticorrosive capabilities of this steel, but it helps to replace products made from conventional carbon steels with a relatively small increase in cost.

Urgency of application

Typical applications of steel AISI 410L (1.4003) are railway and trackless vehicles, freight containers, industrial moving products operating under conditions that contribute to intensive wear and tear: mine conveyors and conveyors, hulls and enclosing structures used to store abrasive-containing compounds and mixtures, chemical equipment.

Chemical composition

The composition of steel AISI 410L (1.4003) according to the technical requirements of UNS ASTM S40977 includes the following elements (iron-base):

Carbon is not more than 0.03%;

Chrome — 10,5… 12,5%;

Nickel — 0.3… 1.0%;

Manganese — no more than 1,5%;

Silicon — no more than 1%;

Bound nitrogen is not more than 0.03%;

Phosphorus — not more than 0.035%;

Sulfur — no more than 0,030%.

Physical and mechanical properties

Density, kg / m ³ — 8000;

Melting point, ⁰ С -1510;

The coefficient of thermal conductivity, in the temperature range 20… 100 ⁰ С, W / mgrad — 25;

Specific heat capacity, J / kggrad — 430;

Modulus of elasticity, GPa — 220;

The coefficient of thermal expansion in the temperature range 20… 100 ⁰ С, μm / deg — 10,4;

The limit of temporary resistance, MPa — 375;

Yield strength, MPa — not less than 280;

Hardness according to Brinell, HB, not more than 180;

Relative elongation at tension,% — not less than 25;

Technological features of processing and assortment

Stainless steel AISI 410L (1.4003) is available in a wide range of rolling profiles, with sheet products available both cold and hot rolled.

This steel is highly rigid, and therefore suitable for use in welded structures. Unlike other ferritic steels, AISI 410L (1.4003) retains its viscosity even under conditions of welding at negative temperatures.

Supplier — AvekGlob Company — offers to buy a sheet or tape made of AISI 410L stainless steel (1.4003) at a price formed on the basis of European and world standards of production. Buy these products can be wholesale and retail. For regular customers, there is a flexible system of discounts.