• +38 (056) 784-39-23
    +38 (056) 784-39-23
  • +49 (30) 217-888-05

Sheet, Inconel tape 602 CA - 2.4633 - Alloy 602a

Sheet, Inconel tape 602 CA - 2.4633 - Alloy 602a

Company Avecglobal sells sheet metal and sheet, manufactured from the Inconel 602CA alloy (other names — 2.4633, Alloy 602CA) at affordable prices from the manufacturer. The supplier guarantees the prompt delivery of products to any address specified by the consumer.

Composition and application

This material belongs to the group of high-carbon chromium-iron-nickel alloys, which are micro-doped with titanium, zirconium, aluminum and yttrium. Alloy 602CA is characterized by:

— excellent creep performance at high operating temperatures;

— excellent fatigue strength;

-exceptional resistance to oxidation at high temperatures and under cyclic shock loads.

The Inconel 602CA alloy (2.4633, Alloy 602CA) is usually supplied in an annealed condition, and is characterized by excellent high temperature creep rates. It also has very good high-temperature corrosion resistance in case of carburization and oxidation / chlorination of the environment, as well as in fine-grained abrasive dust. Inconel 602CA (2.4633, Alloy 602CA) is used in the manufacture of parts of thermal equipment.

The alloy chemical composition, meeting the technical requirements of ASTM B166 and UNS N06025, is given below:

Element Cr Ni C Al Ti Y Zr Mn Si Cu Fe
Content,% 26.00 the basis 0.25 2.40 0.20 0.12 0.10 0.15 0.50 0.10 11.00

Buy at economically advantageous prices sheet or tape, which are made of corrosion-resistant alloy grade Inconel 602CA (2.4633, Alloy 602CA), offers the company AvekGlob. The supplier ensures timely shipment of the ordered rolled metal to any point set by the client.


Basic physical characteristics of the alloy:

Density, kg / m 3 — 7900;

Melting point, 0 C — 1340… 1390;

Specific heat capacity, J / kggrad — 450;

Coefficient of thermal expansion, μm / deg, in the temperature range 20… 700 0 С — 14.2… 16.0;

Coefficient of thermal conductivity, W / megade, in the temperature range 20… 700 0 С — 10.6… 20.5.

Basic mechanical characteristics of the alloy:

The limit of time resistance, MPa — 675;

Yield strength, MPa — 270;

Relative elongation at tension,% — 36;

Modulus of elasticity, GPa, in the temperature range 20… 700 0 С — 215… 185.

Features of welding products from this alloy: when welding, nickel electrodes according to DIN EN ISO 1412 of the brand E Ni 6025 should be used.

Company Avecglob offers to buy at affordable prices from the manufacturer sheet and tape of a special alloy brand Inconel 602CA (2.4633, Alloy 602CA), featuring increased durability under shock and cyclic loads. The supplier makes immediate delivery of the products to any point agreed by the customer.