Supplier — AvecGlob Company — offers various duralumin profiles at reasonable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Dural is a large group of aluminum-based alloys, which are further alloyed with copper, magnesium and manganese. Adding copper increases strength. Dyural is corrosion-resistant, subject to aging, and is characterized by high hardness at low density. At the same time, this alloy is well suited for plastic deformation, riveting, welding and heat treatment. After heat treatment, the corrosion resistance of the duralumin is increased, which is realized in the widespread technologies of flattening flat surfaces of rolled products.
Urgency of application
Dural is used where good strength and good machinability is required.
It is used in the manufacture of pistons of aircraft engines, piston rings, extruded fittings of aircraft, launch vehicles and other equipment, the operation of which is associated with high temperatures. In the automotive industry, elements of automatic body panels are produced from the duralumin. In transport, duralumin is used for the production of external sheathing of transport containers.
The composition of the duralumin usually includes aluminum (about 90%), copper (about 4%), magnesium (about 2%) and from 0.5% to 1% manganese. There may be traces of titanium and zirconium.
Physical and mechanical properties
Dural is a very good conductor of heat and electricity. It has no odor, and under normal conditions it reacts quickly with oxygen in the air, forming a strong and solid alumina film.
- density, kg / m 3 — 2800;
- melting point, 0 С — 640… 650;
- coefficient of thermal expansion in the temperature range 20… 100 0 С, μm / deg — 22… 26;
- Specific heat capacity, J / kggrad — 88… 93;
- Modulus of elasticity, GPa — 73;
- coefficient of thermal conductivity at room temperature, W / Mgrad — 147;
- hardness in Brinell, HB — 115… 135;
- limit of temporary resistance, MPa — 345… 350;
- yield strength, MPa — 450;
- permissible tensile elongation,% — 15… 22.
Assortment and application features
Duralumin profile is produced in a wide range of cross-sections and lengths. Initial duralumin preforms after primary plastic deformation — rolling, stamping, extruding — must be subjected to aging. Aging can be natural (for several days) or artificial (several hours). This treatment optimizes the mechanical properties of the alloy.
Supplier — AvekGlob Company — offers to buy a duralumin profile of various brands in the required assortment of cross sections and length. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.