Alloyed tool steel in the Din system
Are you interested in alloyed tool steel in the Deutsches Institut für Normung system? Supplier Avlob offers to buy alloyed tool steel at a bargain price. The supplier guarantees the timely delivery of products to any address in Europe or abroad. Regular customers receive a discount discount. The price is the best in this segment.
General Provisions
Compliance with the standards of domestic and foreign standards for tool alloyed steels is presented below
Brands | Mass fraction of elements,% | |||||||||
GOST 5950−2000 |
DIN 17350 | AISI / SAE | FROM | Si | Mn | Cr | W | V | Mo | Ni |
8HF | 80CrV2 (1.2235) |
0.70−0.80 | 0.10−0.40 | 0.15−0.45 | 0.40−0.70 | <0.20 | 0.15−0.30 | <0.20 | <0.35 | |
X | 100Cr6 (1.2067) |
L3 | 0.95−1.10 | 0.10−0.40 | 0.15−0.45 | 1.30−1.65 | <0.20 | <0.15 | <0.20 | <0.35 |
9ХВГ | 100MnCrW4 (1.2510) |
1 | 0.85−0.95 | 0.10−0.40 | 0.90−1.20 | 0.50−0.80 | 0.50−0.80 | <0.15 | <0.30 | <0.35 |
X12 | X210Cr12 (1.2080) |
D3 | 2.00−2.20 | 0.10−0.40 | 0.15−0.45 | 11.5−13.0 | <0.20 | <0.15 | <0.20 | <0.35 |
X12MF | X155CrMo12.1 (1.2379) |
D2 | 1.45−1.65 | 0.10−0.40 | 0.15−0.45 | 11.0−12.5 | <0.20 | 0.15−0.30 | 0.40−0.60 | <0.35 |
X12F1 | 1.25−1.45 | 0.10−0.40 | 0.15−0.45 | 11.0−12.5 | <0.20 | 0.70−0.90 | <0.20 | <0.35 | ||
7X3 | 0.65−0.75 | 0.10−0.40 | 0.15−0.45 | 3.20−3.80 | <0.20 | <0.15 | <0.20 | <0.35 | ||
5ХНМ | 55NiCrMoV6 (1.2713) |
L6 | 0.50−0.60 | 0.10−0.40 | 0.50−0.80 | 0.50−0.80 | <0.20 | <0.15 | 0.15−0.30 | 1.40−1.80 |
9ХС | 0.85−0.95 | 1.20−1.60 | 0.30−0.60 | 0.95−1.25 | <0.20 | <0.15 | <0.20 | <0.35 | ||
4Х5МФС | X38CrMoV5.1 (1.2343) |
H11 | 0.32−0.40 | 0.90−1.20 | 0.20−0.50 | 4.50−5.50 | <0.20 | 0.30−0.50 | 1.20−1.50 | <0.35 |
3X3M3F | X32CrMoV3.3 (1.2365) |
H10 | 0.27−0.34 | 0.10−0.40 | 0.20−0.50 | 2.80−3.50 | <0.20 | 0.40−0.60 | 2.50−3.00 | <0.35 |
4Х5В2ФС (EI958) |
0.35−0.45 | 0.80−1.20 | 0.15−0.45 | 4.50−5.50 | 1.60−2.20 | 0.60−0.90 | <0.30 | <0.35 | ||
6ХВ2С | 0.55−0.65 | 0.50−0.80 | 0.15−0.45 | 1.00−1.30 | 2.20−2.70 | <0.15 | <0.30 | <0.35 | ||
7ХГ2ВМФ | (A6) | 0.68−0.76 | 0.10−0.40 | 1.80−2.30 | 1.50−1.80 |