• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05
en

Consultant

Alexander
sales department
+38 (063) 073-44-92
Ask question

Subscription prices and deals

You can always disable the notification by clicking here

Table - calculation of weight sheet, strip, tape brass. Dimensions and thickness sheet, plate, brass tape

Table - calculation of weight sheet, strip, tape brass. Dimensions and thickness sheet, plate, brass tape

Are you interested in determining the weight of a brass sheet, tape or strip from the supplier company AvecGlob? Here you will find the necessary information on this topic.

Calculation method

Used in the case when ordered sheet metal from brass alloys has non-standard dimensions, which will affect the result obtained with the help of a traditional online calculator. For a brass sheet or strip, the mass is determined from the relationship:

M = ρV, where ρ is the density of brass, V is the volume of the sheet (length x width x thickness), mm 3 .

The density of brass depends on the grade of the alloy.

For brass grades ЛАЖ60−1-1, ЛК80- the set parameter is 8200 kg / m 3 ;

For brass grades L59, L60, LZHS58−1-1, LMts58−2 — 8400 kg / m 3;

For brass stamps LZhMts59−1-1, LO60−1, LO62−1, LS63−3, LS64−2 — 8500 kg / m 3;

For brass grades L68, LA77−2, LO70−1 — 8600 kg / m 3;

For brass grades L85 and L90 — respectively 8750 kg / m 3 and 8780 kg / m 3 .

Knowing the geometric dimensions and thickness of the brass sheet / strip, the weight of a unit of rolled products is very simple to determine.

However, it is impossible to establish the mass of the continuous meter of continuous brass (for example, tape) in this way, since the material is usually supplied in coils or coils.

Supplier — AvekGlob Company — offers various types of products from brass alloys of domestic and foreign production, which meets the requirements of standards. The products are offered at affordable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Tabular method

GOST 2208−91 sets the following data for brass tapes of general purpose:

Thickness
tapes,
mm		 Theoretical mass of 1 m 2 of tape, kg, of brass grades Thickness
tapes,
mi		 Theoretical mass of 1 m 2 of tape, kg, of brass grades
L90, L85, L80 L68, L63, LS59−1, LMC58−2 L90, L85,
L80		 L58, L63, LS59−1,
LMC58−2
0.05
0.06
0.07
0.08
0.09
0.10
0.12
0.14
0,15
0.18
0.20
0.22
0.25
0.30
0.35
0.40
0.45
0.50
0.55		 0.44
0.52
0.61
0.70
0.78
0.87
1.04
1.22
1.31
1.57
1.74
1.91
2.18
2.61
3.05
3.48
3.92
4.35
4.78		 0.43
0.51
0.60
0.68
0.77
0.85
1.02
1.19
1.28
1.53
1.70
1.87
2.13
2.55
2.98
3.40
3.83
4.23
4.68		 0.60
0.65
0.70
0.75
0.80
0.85
0.90
1.00
1.10
1.20
1.30
1.35
1.40
1.50
1.60
1.70
1.80
1.90
2.00		 5.22
5.66
6.09
5.53
6.96
7.40
7.83
8.70
9.57
10.44
11.31
11.75
12.18
13.05
13.92
14.79
15.66
16.53
17.40		 5.10
5.53
5.95
6.38
6.80
7.23
7.65
8.50
9.36
10.20
11.05
11.48
11.90
12.75
13.60
14.45
15.30
16.15
17.00

Note. In calculating the theoretical weight density grades L90 brass, L85, L80 assumed to be 8.7 g / cm 3, brass grades L68, L63, LS59−1, LMts58−2 — equal to 8.5 g / cm 2.

Tapes of deformable brass grades are available in a thickness range of 2 to 12 mm and a width of 40 to 300 mm. The length of standard tapes is:

With a thickness of 0.05 to 0.5 mm — not less than 20 m;

With a thickness of 0.55 to 1.0 mm — not less than 10 m;

With a thickness of 1.10 to 2.50 mm — not less than 7 m.

It is possible to estimate the mass of continuous brass sheet metal according to the limiting mass of the bay, which should not exceed 80 kg. This method is less accurate, so it is more appropriate to use the relevant online mass calculators.

Supplier — AvekGlob Company — offers to purchase assorted brass alloys of domestic and foreign production. Products can be bought at a price formed on the basis of European and world standards. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.