Manufacture of brass sheet, strip, tape

Are you interested in the production of brass sheets, strips and tapes from the supplier company AvecGlob? Here you will find the necessary information on this topic.

General issues of production technology

Sheet metal from various grades of deformable brass alloys is used in the production of transformer strips, cable and high-frequency tapes, roofing tapes, and sheet metal for architectural and construction applications.

The technology of continuous casting-rolling of metal used in most cases includes the following transitions:

Transfer of molten metal from the electrometallurgical casting installation to a double-flow casting machine in which the blanks are cooled;

From there, the brass comes directly to the hot rolling station and continues to deform in the hot state. Depending on the machine settings, a tape, sheet or strip is produced;

During the rolling process, the sheet billet is cooled by a stream of continuously supplied water (for special brasses, quick crystallization of which from the melt is undesirable, cooling emulsions are used);

Cooled rolling enters the cutting unit; this transition is skipped if the plant produces the tape: in this case it goes to the winding device;

The calibration is already done with the cooled metal, at the same time the necessary surface quality is achieved and the accuracy of the dimensional parameters of brass sheet steel is ensured.

Supplier — AvekGlob Company — offers various types of products from brass alloys of domestic and foreign production, which meets the requirements of standards. The products are offered at affordable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Quality parameters of brass sheet metal

Integrated production of brass sheet, tape or strip provides:

High surface quality of finished rolled products, which is controlled by sensors and computers, depending on the customer’s requirements;

Maximum variety of width and thickness of sheet metal;

Strength and uniformity of all mechanical indicators of finished products;

Flexibility when changing lines for production of strip, sheet or tape with changed geometric dimensions.

The sheet metal of brass is further subjected to plastic deformation operations — cutting, punching, bending, stretching or forming, depending on the configuration of the final products.

Supplier — AvekGlob Company — offers to purchase assorted brass alloys of domestic and foreign production. Products can be bought at a price formed on the basis of European and world standards. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.