Table - calculation of the weight of brass circle and rod. Dimensions and thicknesses of brass wheel and rod

Are you interested in determining the weight of a brass rod or a circle from the supplier company AvecGlob? Here you will find the necessary information on this topic.

Calculation method

State standards provide for the production of brass rolled products of three types of cross-section — round, square and hexagonal. If it is necessary to perform an accurate calculation of the mass M of one running meter,

M = γFl, where γ is the density of brass, kg / m ³, l is the length of the volume brass billet, m, and F is its cross-sectional area.

To determine the cross-sectional area, one can use one of the following formulas:

F = 3,14r ² — for round bars (r is the radius of the bar or circle);

F = a ² — for a square rod (a is the side of a square);

F = 2,598a ² or F = 0,866h ² — for the bar / circle hexagonal cross-section (a — width of the face, h — diameter of the circle inscribed in the hexagonal section of the rod).

The density of brass depends on the brand of the workpiece:

For brass grades ЛАЖ60−1-1, ЛК80−3 the parameter is 8200 kg / m ³ ;

For brass grades L59, L60, LZHS58−1-1, LMts58−2 — 8400 kg / m ^3;

For brass stamps LZhMts59−1-1, LO60−1, LO62−1, LS63−3, LS64−2 — 8500 kg / m ^3;

For brass grades L68, LA77−2, LO70−1 — 8600 kg / m ^3;

For brass grades L85 and L90 — respectively 8750 kg / m ³ and 8780 kg / m ³ .

Supplier — AvekGlob Company — offers various types of products from brass alloys of domestic and foreign production, which meets the requirements of standards. The products are offered at affordable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Table method for determining the mass of rolled products from brass alloys

The weight of one running meter can be set according to the table, depending on the type of cross-section of the bar / circle:

This method is less accurate, so often use the appropriate online mass calculators.

Supplier — AvekGlob Company — offers to purchase assorted brass alloys of domestic and foreign production. Products can be bought at a price formed on the basis of European and world standards. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.