ASTM B906. Standard Specification for General Requirements for Rolled Nickel and Nickel Alloy Plates, Sheets and Strips

Are you interested in the ASTM B906 standard concerning the general requirements for the rolling of rolled nickel alloys from the supplier AvecGlob? Here you will find interesting information on this topic.

General Provisions

This standard refers to the general requirements for sheet metal rolling from nylon or its alloys. The materials must be made by one of the electric arc, electro-induction or other suitable methods of smelting. Samples are also subjected to chemical analysis, tensile testing and grain size measurement. If one of the samples does not meet the prescribed requirements, two additional samples from different lots are subjected to a second check.

Security

This standard does not purport to address all of the security concerns (if any) associated with its use. ASTM B906 is responsible for establishing good practices in occupational safety and health and determining the applicability of regulatory restrictions before use.

Supplier — AvekGlob Company — offers at reasonable prices from the manufacturer sheet metal, made of nickel and its alloys, which complies with the standards of ASTM B906. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Application area

This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in a separate specification, do not apply to nickel alloy sheet blanks for each of the following specifications issued by ASTM: Specifications B127, B162, B168, B333, B409 B424, B434, B435, B443, B463, B536, B575, B582, B599, B620, B625, B670, B688, B709, B718, B755, B814, B818, B872.

In the event of any conflicting requirements, the requirements of the purchase order, the specification of the individual materials and this general specification prevail in this sequence.

Additional Documentation

ASTM standards:

A262 Practice of detecting susceptibility to intergranular changes in austenitic stainless steels;

Specification A693 for steel plate, sheet and strip, which are made of heat-resistant / heat-resistant steels;

Specification B127 for nickel-copper alloy (UNS N04400). Plate, sheet and strip;

B162 — Specification for nickel plate, sheet, and strip;

Specification B168 for alloys based on nickel and chromium (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045 and N06696), nickel-chromium-cobalt-molybdenum alloy (UNS N06617) and nickel-iron-chromium-tungsten alloy UNS N06674). Plate, sheet and strip;

Specification B333 for an alloy based on nickel and molybdenum, sheet and strip;

Specification B409 for an alloy of nickel-iron-chromium alloy, sheet and strip;

Specification B424 for the Ni-Fe-Cr-Mo-Cu alloy (UNS N08825, UNS N08221 and UNS N06845). Plate, sheet and strip;

Specification B434 for alloys based on nickel and molybdenum and chromium (UNS N10003, UNS N10242). Plate, sheet and strip;

Specification B435 for UNS N06002, UNS N06230, UNS N12160 and UNS R30556. Plate, sheet and strip;

B443 — specification for nickel-chromium-molybdenum-niobium alloy (UNS N06625) and nickel-chromium-molybdenum-silicon aluminum plate (UNS N06219), sheet and strip;

Specification B463 for UNS N08020 alloy plate, sheet and strip;

B536 Specification for nickel-iron-chromium-silicon alloys (UNS N08330 and N08332). Plate, sheet and strip;

Specification B575 for low-carbon nickel-chromomolybdenum, low-carbon nickel-chromomolybdenum-copper, low-carbon nickel-chromium-molybdenum-tantalum, low-carbon nickel-chromium-molybdenum-tungsten alloy, and low-carbon nickel-molybdenum-chromium alloys;

Specification B582 for nickel-chromium-molybdenum-copper alloy, sheet and strip;

Specification B599 for the alloy system «nickel-iron-chromium-molybdenum-niobium» (UNS N08700), sheet and strip;

Specification B620 for nickel-iron-chrome-molybdenum alloy (UNS N08320). Plate, sheet and strip;

B625 — specification for flat products from alloys according to UNS N08925,

UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830 and UNS R20033;

Specification B670 for electroplating of nickel alloy (UNS N07718). Plate, sheet and strip;

Specification B688 for chromium-nickel-molybdenum iron (UNS N08366 and UNS N08367);

Specification B709 for iron-nickel-chromium-molybdenum alloy (UNS N08028). Plate, sheet and strip;

Specification B718 for nickel-chromium-molybdenum-cobalt-tungsten-iron-silicon alloy (UNS N06333), sheet;

Specification B755 for alloys based on nickel-chromium and molybdenum-tungsten (UNS N06110). Plate, sheet and strip;

Specification B814 for nickel-chromium-iron-molybdenum-tungsten-based alloy (UNS N06920). Plate, sheet and strip;

Specification B818 for the alloy system «cobalt-chromium-nickel-molybdenum-tungsten» (UNS R31233), sheet and strip;

Specification B872 for, sheets and strip made of galvanized steel;

Specification B880 for general requirements for the analysis of chemical tests for nickel and nickel-cobalt alloys.

Supplier — AvekGlob Company — offers to purchase a different range of rolled products made of nickel alloys that meet the specifications of ASTM B906. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.