Waterjet cutting of metal

Are you interested in the technology of waterjet cutting of rolled metal, steels and alloys from the supplier company AvecGlob? Here you will find interesting information on this topic /

The essence of the operation

Hydroabrasive cutting consists in the fact that a highly concentrated water stream is directed to the surface to be separated, which is mixed with the flow of abrasive particles in the jet. Such cutting is the most widely used process with the use of water, as it can cut metal without any limitations in thickness and materials. Hydroabrasive cutting of metals and alloys is considered to be a technologically flexible and economical method of processing. This is an accurate method of cutting complex metals or complex parts that may not meet the requirements of mechanical cutting or plastic shear cutting, and the material of the workpiece is sensitive to temperature stresses.

The cutter for the realization of the process under consideration is a technological tool capable of cutting large metal surfaces, a mixture of water and abrasive substance. Adding an abrasive significantly increases the possibilities of the process, since the kinetic energy of such a jet is higher than in conventional hydrodynamic cutting.

Urgency of application

Alternative technologies for cutting metals (with the exception of plastic shear cutting), in particular plasma, gas-oxygen, electric spark or laser cutting, can not compete with waterjet cutting when it comes to the absence of zones exposed to heat. In addition, because of small values of technological gaps, waterjet cutting is characterized by minimal metal losses, which is especially important when cutting scarce or expensive alloys.

Supplier — AvekGlob company — offers at affordable prices from the manufacturer various metals and alloys, the blanks for which can be obtained using waterjet cutting. The assortment and the number of such blanks are completely determined by the customer’s wishes. The supplier guarantees the timely delivery of products to any address specified by the consumer

Equipment

The cutting machine for waterjet cutting is an industrial installation in which water flows and high-pressure abrasives are used. The abrasive substance is mixed with water for deeper penetration into the thickness of the workpiece. Modern waterjet cutting machines are equipped with automatic program control, which allows you to optimize the cutting of metal and reduce its loss during cutting. All waterjet cutting machines are highly environmentally friendly, because the used abrasive is filtered and dried again to the treatment zone and does not become waste that needs to be recycled.

Supplier — AvekGlob company — offers to purchase various metals and alloys, the blanks for which are obtained by hydroabrasive cutting. The quantity, accuracy and dimensions of the blanks are determined by the customer’s wishes. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.