Metal cutting with water under pressure

Are you interested in the technology of metal cutting of metals, steels and alloys by high pressure water jet from the supplier company AvecGlob? Here you will find interesting information on this topic

The essence of the operation

Hydrodynamic cutting is based on the use of high-pressure water for the separation of a highly directional jet. At the same time, no tool is required and there are no wear parts of the process equipment. The process is used mainly for sheet metal and profiles.

The sheet is placed in a chamber filled with water and fixed in the required position. To the edge of the sheet is fed a working nozzle, the movement of which is controlled by a special program, according to the configuration of the cutting line. The waste is washed off by a water jet into the lower part of the chamber, where it is removed. Filtered and redirected to the working tank of the unit for reuse.

Urgency of application

Hydrodynamic cutting can be used for all types of metals, including brittle, since there is no direct contact between the cutting tool and the workpiece. There is also no thermal deformation of the edges, and from one billet it is possible to obtain several different semi-finished products, which is of importance for small-scale production.

Supplier — AvekGlob company — offers at reasonable prices from the manufacturer various metals and alloys, blanks for which can be obtained using hydrodynamic cutting. The assortment and the number of such blanks are completely determined by the customer’s wishes. The supplier guarantees the timely delivery of products to any address specified by the consumer

Technology Capabilities

Materials that can be cut in this way:

— Soft steel, stainless steel, tool steel, high-alloy steel, hardened steel;

— Aluminum, titanium, brass, copper, bronze;

— Inconel, Hastelloy, tungsten, cobalt;

— Non-metals and composites, plastics, rubber, glass, granite, fiberglass, Kevlar.

Process Benefits

They include the absence of a thermal zone on the workpiece, a clean surface after cutting, and the absence of mechanical stresses in the workpiece. It is also possible to perform drilling operations, or cutting through a complex contour without subsequent debugging. In hydrodynamic cutting, there is no unpleasant odor, and ventilation of the work area is not required.

Supplier — AvekGlob company — offers to purchase various metals and alloys, blanks for which are obtained by hydrodynamic cutting. The quantity, accuracy and dimensions of the blanks are determined by the customer’s wishes. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.