Sheet, plate metal. Standard sizes are inches and millimeters. Transfer inches to millimeters.
Are you interested in the standard sizes of thick plates and metal plates from the supplier — the company Avek Global? Here you will find the necessary information on this topic
Buy a thick plate and plate at economically reasonable prices from the manufacturer offers the company Avek Global. The supplier ensures the timely shipment of products to any address specified by the consumer.
general information
The dimensions of thick plates and metal plates are regulated by the requirements of GOST 1577−93. The standard applies to thick-plate and broadband rolled products of constructional quality alloyed and non-alloyed steel.
Rolling is made by thickness:
4… 160 mm — sheet;
6… 60 mm — broadband.
The requirements for the rolled products must comply with:
GOST 19903 — for sheet and roll;
GOST 82 — for broadband.
The conventional designations for the characteristics of thick plates and metal plates are given in the table.
| Characteristics of rolled products | Symbol for the characteristic | |
| Rolling accuracy for thick plate thickness: | ||
| increased | A | |
| normal | B | |
| Length of broadband rolling: | ||
| unmeasured | ND | |
| dimensional | MD | |
| fold dimensional | KD | |
| Flatness of rolled products: | ||
| normal | Mon | |
| improved | PU | |
| high | PV | |
| particularly high | BY | |
| Rectangular curvature of broadband classes: | A | |
| — A | B | |
| — B | ||
| Edge condition: | ||
| — unedged | BUT | |
| — edging | ABOUT | |
| Rental conditions: | ||
| — without heat treatment | Not denoted | |
| — Thermally treated | THAT | |
| Hardness of rolled products up to 80 mm thick. in the state of delivery: | ||
| — without heat treatment, after controlled rolling, in a heat-treated condition | TV1 | |
| — without heat treatment and continuous rolling mills with norms for annealed or highly tempered rolled products | TV2 | |
| Control hardness of rolled steel thickness of St. 80 mm | TV3 | |
| Mechanical properties: | ||
| — rolled products up to 80 mm thick. in the delivery condition or on normalized workpieces | M1 | |
| — plate rolling up to 80 mm thick, supplied without heat treatment or from continuous rolling mills, with norms for annealed or highly tempered rolled products | M2 | |
| — in the normalized state on billets in the size determined by the consumer | M3 | |
| — after quenching with tempering on blanks by the size determined by the consumer | M4 | |
| Normalized impact strength at minus 20 ° C for rolled products up to 80 mm thick. | KUV1 | |
| Control of toughness at −20… −50 ° C for rolling from quiet steel grades | KUV2 | |
| Cold Bending Test | CI | |
| The macrostructure of rolled products with a thickness of more than 10 mm | CCM | |
| Guarantee of decarburization no more than 2% per side | 1C | |
| Cleaning from scale | UO | |
| Stripping of burrs obtained during trimming of thick plates and cutting of broad-band rolled products into lengths | US | |
| Ultrasonic inspection of metal continuity | 1UK, 2UK, 3UK | |
| Type of filling in the quality document with the indication: | ||
| — the rental corresponds to GOST 1577 | DK1 | |
| — all types of tests performed | DK2 | |
| Warranty of weldability | HS | |
Buy at an affordable price of thick plate and metal plates at the price of the manufacturer offers the company Avek Global. The supplier ensures the timely delivery of products to the address specified by the customer.