Tu 48-19-247-87. Molybdenum rods with a diameter from 16 to 125 mm. Technical conditions.

section

Are you interested in Tu 48−19−247−87? Supplier Avlob offers to buy a molybdenum rod with a diameter of 16 -125 mm at a bargain price. The supplier guarantees the timely delivery of products to any specified address. Regular customers can take advantage of discount discounts. The price is the best in this segment.

Scope of application Tu 48−19−247−87

This specification regulates the general requirements for the production of molybdenum cermets. Finished products must meet mechanical requirements, including tensile strength, yield strength, elongation given for specific conditions, diameter tolerance. Chemical analysis, tensile tests and hardness tests must be carried out in accordance with the standard.

Dimensions and Limit Deviations

Make	Surface condition	Diameter, mm	Tolerances
MCH	Unfinished	16	± 0.5	from 150 to 1000
		St. 16 to 20 after 1	± 1.0	— «---
		St. 20 to 28 through 2	± 1.5	from 150 to 1000
		St. 28 to 40 after 2	± 2.0	— «---
MCH	Refined	16	+ 0.38	from 100 to 500
		16	— 0.13	from 100 to 500
		St. 16 to 20 after 1	+ 0.38	— «---
		St. 16 to 20 after 1	— 0.13	— «---
		St. 20 to 36 after 2	+ 0.51	— «---
		St. 20 to 36 after 2	— 0.25	— «---
MCHVP	Unfinished	16	± 0.5	from 150 to 1000
		St. 16 to 20 after 1	± 1.0	— «---
		St. 20 to 28 through 2	± 1.5	from 150 to 1000
		St. 28 to 40 after 2	± 2.0	— «---
		St. 40 to 60 after 2	± 2.0	from 150 to 1000
		St. 60 to 80 after 5	± 2.5	— «---
MCHVP	Refined	16	+ 0.38	from 100 to 500
		16	— 0.13	from 100 to 500
		St. 16 to 20 after 1	+ 0.38	— «---
		St. 16 to 20 after 1	— 0.13	— «---
		St. 20 to 36 after 2	+ 0.51	from 100 to 500
		St. 20 to 36 after 2	— 0.25	from 100 to 500
		St. 36 to 60 after 2	+ 0.64	— «---
		St. 36 to 60 after 2	— 0.38	— «---
		St. 60 to 125 after 5	± 0.8	from 100 to 500

Chemical composition

Component name	Brand MCH	Brand МЧВП
aluminum	0.004	0.004
iron	0.010	0.010
nickel	0.005	0.005
silicon	0.010	0.010
calcium	0.003	0.003
magnesium	0.002	0.002
carbon	0.010	0.030
oxygen	0.008	0.005
hydrogen	-	0.0006
nitrogen	-	0.002
molybdenum	rest	rest

The bars of the MCH grade are supplied in a deformed unannealed state. The bars of the MCHVP brand with a cross section of 16 — 80 mm are supplied in a deformed unannealed state, with a cross section of 85 -125 mm — in a cast undeformed and unannealed state. Supplier Avlob offers to buy a molybdenum rod with a diameter of 16 -125 mm according to Tu 48−19−247−87 at a bargain price. The price is the best in this segment of rental.

Quality requirements

The surface is not allowed the presence of shells, cracks, bundles, large burrs and strokes. Small strokes, burrs, traces of forging or straightening within the tolerance for diameter, as well as single large burrs on MRN rods are allowed. The ends of the rods are evenly trimmed. Minor chips are allowed. The bars are supplied straight. The deflection should not exceed 1% of the measured length.

Delivery, price

Are you interested in Tu 48−19−247−87? Buy a molybdenum rod with a diameter of 16 -125 mm at an affordable price from the supplier Avlob today. The price is formed on the basis of European production standards. Supplier Avlob offers to buy molybdenum rod with a diameter of 16 -125 mm wholesale or retail.

Consultant

Subscription prices and deals