• +38 (056) 790-91-90
    +38 (056) 790-91-90
  • +49 (30) 217-888-05
en

Consultant

Nicholas
sales department
+38 (050) 369-66-30
Ask question

Subscription prices and deals

You can always disable the notification by clicking here

Tu 11-77 (Ya0.021.057 THAT). Molybdenum rods.

Tu 11-77 (Ya0.021.057 THAT). Molybdenum rods.

Are you interested in Tu 11−77 (Яе0.021.057 ТУ)? Supplier Avlob offers to buy molybdenum rod at a bargain price. The supplier guarantees the timely delivery of products to any specified address. Regular customers can take advantage of discount discounts. The price is the best in this segment.

Scope of application Tu 11−77 (Яе0.021.057 ТУ)

This specification regulates the general requirements for the production of a molybdenum rod. Finished products must meet mechanical requirements, including tensile strength, yield strength, elongation given for specific conditions, diameter tolerance. Chemical analysis, tensile tests and hardness tests must be carried out in accordance with the relevant standards.

Percent composition

Molybdenum brand Mo Al + Fe Ni Si Ca + Mg
MCH 99,955 0.018 0.005 0.014 0.008
MK 99,932 0.018 0.005 0.019 — 0.037 0.008
MRN 99,933 0.025 0.020 0.014 0.008

Diameter, length of bars and delivery condition

Diameter, mm Tolerance,% Length, mm, not less than
1.0 — 1.9 through 0.1 ± 2.5 1000 drawn
2.0 — 2.9 through 0.1
3.0 — 4.8 through 0.1 forged
5.0 — 10.5 through 0.5 ± 3.0 500
11.0 — 18.0 through 1.0 300
The smallest diameter of the bar of MK grade is 11.0 mm, and the bar of MCH and MPN brand is more than 15.0 mm. by agreement. In each delivered lot, 10% of bars of at least 70% of the length specified in the table are allowed. Supplier Avlob offers to buy a rod of molybdenum according to Tu 11−77 (Ya0.021.057 TU) at a bargain price. The price is the best in this segment of rental.

Quality requirements

The colors of tarnishing are allowed. On the surface of the wrought iron, oxidation is allowed. The presence of shells, cracks, delaminations, large burrs and strokes is not permissible. Small strokes, burrs, traces of forging or straightening within the tolerance for diameter, as well as single large burrs on MRN rods are allowed. The ends of the rods are evenly trimmed. Minor chips are allowed. The bars are supplied straight. The deflection should not exceed 1% of the measured length.

Delivery, price

Are you interested in Tu 11−77 (Яе0.021.057 ТУ)? Buy a molybdenum rod at an affordable price from the supplier Avlob today. The price is formed on the basis of European production standards. Supplier Avlob offers to buy molybdenum rod wholesale or retail. We invite you to partner cooperation.