GOST 26492-85. Rolled rods made of titanium and titanium alloys. Technical conditions.
Are you interested in GOST 29492−85 concerning bars made of titanium and titanium alloys from the supplier of AvecGlob? Here you will find interesting information on this topic.
Application area
The technical conditions of this standard apply to rolled bars of titanium and its alloys, which are used for the manufacture of various parts and structures.
The bars are divided into two groups: conventional and improved quality. The bars of usual quality are denoted by the brand of titanium or titanium alloy without additional signs, and the increased quality by the letter «P».
The dimensions of the bars and the maximum deviations from them must correspond to those indicated in the table
| Nominal diameter, mm | Limit deviations in the diameter of the rod, mm | Cross-sectional area, cm 2 | Theoretical mass of 1 m of rod, kg |
| 10 | +0.4 | 0.785 | 0.353 |
| 12 | -0.6 | 1.131 | 0.509 |
| 14 | 4−0.6 | 1.539 | 0.692 |
| 16 | -0.8 | 2,011 | 0.905 |
| 18 | 2,545 | 1,045 | |
| 20 | 3.142 | 1,413 | |
| 22 | 3,801 | 1,710 | |
| 25 | 4.909 | 2.209 | |
| 28 | 6,158 | 2.771 | |
| thirty | 7,069 | 3.182 | |
| 32 | + 0.6 | 8,042 | 3,618 |
| 35 | -1.0 | 9,621 | 4,329 |
| 38 | 11.341 | 5,103 | |
| 40 | 12.566 | 6,540 | |
| 42 | 13,854 | 6,234 | |
| 45 | 15,900 | 7,155 | |
| 48 | 16,096 | 8,143 | |
| 50 | 19,635 | 8,865 | |
| 52 | + 0.6 | 22,060 | 9,927 |
| 55 | -1,4 | 23,758 | 10,691 |
| 60 | 28,274 | 12,742 | |
| 65 | 33,183 | 14,932 | |
| 70 | + 1.0 | 38,485 | 17,318 |
| 75 | -1.5 | 44,179 | 19,880 |
| 80 | 50,265 | 22,619 | |
| 85 | 56,745 | 24,535 | |
| 90 | ± 1.5 | 63,617 | 28,627 |
| 100 | 78,540 | 36,343 | |
| 110 | 95,033 | 42,764 | |
| 120 | 113,097 | 50,894 | |
| 130 | ± 3.0 | 132,732 | 59,629 |
| 140 | 153,938 | 69,272 | |
| 150 | 176,715 | 78,521 |
Note. Theoretical mass of 1 m of rod is calculated by nominal diameter at a density of 4.5 g / cm 3, which corresponds to the density of titanium.
Supplier — AvekGlob Company — offers at affordable prices from the manufacturer rolled rods made of titanium and titanium alloys and meet the technical requirements of GOST 26492−85. The supplier guarantees the timely delivery of products to any address specified by the consumer.
Production conditions
- By the length of the rods produce: unlimited length:
from 0,5 to 4 m — at a diameter of rods from 10 to 18 mm inclusive,
from 0,5 to 6 m — at a diameter of rods of st. 18 to 60 mm inclusive,
from 0,5 to 2 m — with the diameter of the rods of st. 60 to 150 mm;
- dimensional and multiple dimensional length within the non-dimensional with limiting deviations:
+ 30 mm — for bars with a diameter from 10 to 18 mm inclusive, + 50 mm — for bars with a diameter of st. 18 to 60 mm inclusive, + 70 mm — for bars with a diameter of st. 60 to 150 mm.
- The bars of a multiple dimensional length should be made with allowance for allowance for each cut 10 mm.
- The bars must be straight. The deviation from straightness for 1 m of length should not exceed 5 mm for bars with a diameter from 10 to 60 mm inclusive, 7 mm for bars with a diameter of approx. 60 to 150 mm. The total deviation from straightness should not exceed the product of the maximum deviation from straightness by 1 m of rod per its length in meters.
Supplier — AvekGlob Company — offers to purchase various profiles of rolled bars made of titanium alloys and corresponding to the provisions of GOST 26492−85 in the assortment. Products can be bought at a price formed on the basis of European and world standards of production. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.