Welding of copper by argon

Are you interested in welding copper with argon? Supplier Avlob offers to buy copper and any copper alloy at a bargain price. The supplier guarantees the timely delivery of products to any address in Europe or abroad. Regular customers receive a discount discount. The price is the best in this segment.

Protective atmosphere

Welding of copper alloys is carried out in an atmosphere of protective gases. The greatest protection efficiency is achieved with nitrogen, which increases the efficiency of the arc discharge.

Welding difficulties

Significant thermal expansion causes residual deformation; good thermal conductivity leads to increased cooling rates of the weld pool and requires preheating of the metal. High casting shrinkage of the cooling metal can lead to deformation of the weld zone; a · the high sensitivity of molten copper to hydrogen promotes the appearance of water bubbles and the appearance of small cracks and pores.

Welding wire

Before welding, it is cleaned by etching with an aqueous solution of nitric acid or a mixture of hydrochloric and sulfuric acid with further washing in water, after in alkali, and then again in running clean water. After the end of the washing, the wire is dried with hot air. For example, copper electrodes are calcined before welding start, thereby reducing the likelihood of a hydrogen disease.

Delivery, price

Are you interested in welding copper with argon? Buy any copper alloy at an affordable price from the supplier Avgob today. The price is formed on the basis of European production standards. Supplier Avlob offers to buy copper and any copper alloy at the optimal price in bulk or at retail.