Marks of magnesium-titanium alloy

Are you interested in the brands of magnesium-titanium alloys from the supplier company AvecGlob? Here you will find interesting information on this topic.

Foreign brands of magnesium-titanium alloys

Magnesium-titanium 30% master alloy is used for the production of titanium-containing copper-forged alloys. Such alloys have good mechanical properties, are fairly resistant to corrosion and have good wear resistance. Master alloy is also used as a refiner for grain and as a deoxidizer. Some magnesium-titanium alloys are also used as an intermediate component in the production of zinc and alloys based on it.

The assortment and chemical composition of magnesium-titanium alloys produced abroad is presented in the table:

Widespread use of titanium-magnesium alloys was obtained in medicine, in the production of bioimplants. Alloys of Mg-Ti have been successfully synthesized by mechanical alloying. The spark plasma sintering is identified as a processing method to strengthen the alloy powders obtained by ball milling into the bulk material without destroying the alloy structure. This is an important conclusion, since this metastable Mg-Ti alloy can only be heated to 200 ° C for a limited time without achieving a stable state of separated magnesium and titanium.

The excellent corrosion resistance of the Mg80-Ti20 alloy in a simulated physiological environment is shown by hydrogen evolution tests, where the corrosion rate was sharply reduced compared to pure magnesium, and electrochemical measurements showed increased potential and resistance compared to pure magnesium. Mg and Mg-Ti alloys can also be used to make new polymer-metal compositions, for example, with polylactic-co-glycolic acid (PLGA) to avoid damaging the pH of the polymer during failure. Thus, Mg-Ti alloys can be manufactured and used to achieve enhanced corrosion resistance and maintain cytosocompatibility.

Supplier — AvekGlob company — offers titanium-magnesium alloys of foreign production in assortment of brands and at reasonable prices from the manufacturer. The supplier guarantees the timely delivery of products to any address specified by the consumer.

Technology of production of alloys based on titanium and magnesium

Such alloys have good specific strength and damping ability, but have low corrosion resistance. Increasing the percentage of titanium in the alloy helps to eliminate this disadvantage. The most well-known are alloys of MgTi26 MgTi59 grades, obtained by mechanical alloying of magnesium base powder. Sometimes, to further increase the corrosion resistance, up to 4… 6% aluminum is introduced into these alloys.

Supplier — AvekGlob Company — offers to buy assortment of copper-magnesium alloys of domestic production. Products can be bought at a price formed on the basis of European and world standards. Implementation is possible in bulk and retail, for regular customers, a flexible system of discounts operates.